Kings dental 3D printer, using the principle of SLA 3D printing
technology, also known as stereolithography 3D printer. Compared to
small desktops on the market, Kings SLA 3D printers have a larger
molding space and are commercial large industrial 3D printers. The
Kings industrial 3D printer is deeply used in dentistry and is an
important tool for invisible braces manufacturers to make dental
models.
Invisible braces are revolutionary products for orthodontics, which
are more aesthetically pleasing, more scientific and more hygienic
than steel braces. The wire braces are all adjusted by the doctor
with pliers, the accuracy is not enough, the recovery is slow, and
complications are easy to occur. The invisible braces are gradually
corrected according to the actual condition of the patient through
the computer software, and all the correction processes have clear
and predictable and controllable. And the beauty of the invisible
braces is also unmatched by the wire braces.
Wire braces and invisible braces
So, what is the process of making invisible braces? A brief summary
is the steps: initial diagnosis of teeth, modeling, modeling,
determination of dynamic corrections, design of dental model 3D
data, printing of dental models, and production of invisible
braces. The step of printing the tooth model is done by a 3D
printer, and it can be said that it is difficult to produce
invisible braces without a 3D printer.
Dental correction dynamic simulation program
3D printing mass production tooth model
Invisible braces made from 3D printed dental molds
A patient's orthodontics often has to undergo dozens or even
hundreds of corrections. Each minor correction requires an
individually numbered braces, each of which requires a
corresponding dental prototype. The dental mold is made by Kings
large-size light-curing 3D printer. The cost of a dental mold is
less than one yuan, which becomes an indispensable dental model 3D
printer for invisible braces.
Advantages of the Kings dental model 3D printer:
1, high precision. Kings' SLA 3D printer technology has higher precision than DLP, FDM, SLS and other
technology types. Its point-to-line-to-surface molding method can
produce tooth models with a layer thickness of 0.05mm, making the
prototype of the dental mold. More precise, thus ensuring the
accuracy of the invisible braces;
2, high efficiency. The Kings 3D printer has a large-sized molding
space, and adopts high-efficiency variable spotting technology and
triple-reduction scanning technology. It can print multiple
patient's customized dental molds in one batch, print at night, and
take time during the day to save more time.
3. Low cost. Kings 3D printing equipment, which is a photosensitive
resin 3D printer, is cheaper than the materials used in DLP, SLS
and other models. The cost of a dental mold is less than one yuan.
