SPECIFICATIONS OF KINGS-600 INDUSTRIAL SLA 3D LASER PRINTER
Basic information
Construction Size: 600mm(X)×600mm(Y)×400mm(Z)
Equipment Size (without display): 108cm(W)×120cm(L)×198cm(H)
Equipment Weight:about 980kg
Rated Dissipation: 1.5KVA
LASER SYSTEM
Laser Type: Nd: YV04 Solid Laser
Wave Length: 355nm
Power: Minimum Power to Liquid Level≥300mW
COATING SYSTEM
Coating ModeIntelligent Position Vacuum Recoating
Normal Layered Thickness: 0.1mm
Rapid Build Layered Thickness: 0.15mm
Precise Build Layered Thickness: 0.05mm
Special Build Layered Thickness: 0.05mm~0.20mm
OPTICAL & SCANNING SYSTEM
Light Spot(diameter @1/e2): 0.10-0.15mm
Scanning Mode: Germanic Galvanometer Scanner
Parts Scanning Speed: Maximum 10.0m/s
ELEVATOR SYSTEM
Vertical Resolution Ratio: 0.0005mm
Repeat Positioning Accuracy: ±0.01mm
RESIN TANK
First Tank Weight: about 240kg
Forming Material: Photosensitive Resin
Resin Heating Method: Bottom Heating with Silicone Rubber
CONTROL SOFTWARE
Machine Control Software: KING3D Control Software
Device Software Interface: 3D Design Software, STL File Format
SOFTWARE SYSTEM
Master Controller Operation System: Windows 7
Network Type and Protocol: Ethernet, TCP/IP
INSTALLATION CONDITION
Current Source: 200-240VAC 50/60Hz, Single Phase,10A
Ambient Temperature: 20-26ºC
Relative Humidity: ＜40%,Frost Free Knot
