YB11B1 High Performance EMI Power Inlet Filter Socket with Fuse
Power Line Filter
IEC Inlet Emi Filter:
The IEC Inlet EMI filter is a passive electronic component designed
to reduce or eliminate electromagnetic interference (EMI)
transmitted through power lines and cables. IEC inlet EMI filter is designed to comply with the safety and
performance standards of the International Electrotechnical
Commission (IEC). Its commonly used current: 1A,3A,6A,8A,10A, etc., applicable
voltage: 115V/250V, to meet the specific requirements of different
applications.
Feature Of IEC Inlet Emi Filter:
1. Current Rating: Emi Filter is available in various current
ratings to accommodate different equipment power requirements.
2. Voltage Rating: IEC Inlet Filter is available in various voltage
ratings to accommodate different power supply voltage levels.
3. Safety: IEC Inlet EMI filter is designed to meet safety
standards and regulations, including those set by the International
Electrotechnical Commission (IEC) and other regulatory bodies.
Characteristics:
(1) Voltage
Rating............................................................................................115/250VAC
(2) Current Rating:
A.@115VAC...............................................................................................
6A RMS Max.
B.@250VAC...............................................................................................
6A RMS Max.
(3) Oprating Frequency:50/60Hz
(4) Leakage Current: each line to ground
A.
115VAC/60Hz...........................................................................................
0.4mA Max.
B.
250VAC/50Hz...........................................................................................0.8mA
Max.
(5) Hipot Rating(for one minute)
A. Line to
ground............................................................................................
2250VDC
B. Line to
line..................................................................................................
1450VDC
(6) IR: 50M ohm A7 500VDC any input or output to ground
(7) Temperature Range: -25℃~+85℃
Typical Applications:
1. Portable electrical and electronic equipment
2. Medical equipment
3. Test and measurement equipment
4. Single-phase power supply,switch-mode power supply
YB11C1-6A-Q Specification:
| Item | YB-B Series Inlet Filter | Rated Current | 1~10A |
| Model | IEC Filter YB-C | Environmental Temperature | 40°C |
| Transfer Function | Low Pass | Temperature Range | 25 / 085 / 21 |
| Package Type | Surface Mount | Operating Frequency | 50/60HZ |
| Nominal Center Frequency | 10K-30MHZ | Line to Line | 1450VDC |
| Insertion Loss | 60~90dB | Line to Ground | 2250VDC |
| Input Impedance | 50Ω | Maximum Leakage Current | 250VAC/60HZ 0.8mA Max |
| Rated Voltage | 115V/250V | MOQ | 1pcs |
YB11B1-6A-Q Product Picture:
Physical Dimension:
Electrical Schematic:
Common Mode Differential Mode:
Our Certificates:
Single Phase Filter:
cUL:20190321-E471748
TUV:B0899310001Rev.01
CQC:19001226449
CE:SZAIS180620005-01
ROHS:MMCRHRWM60371744
Three Phase Filter:
cUL:20190325-E502442
ENEC:ENEC-02580
CE:SZAIS180620005-01
ROHS:MMCRHRWM60371744
