1PC Industrial YASKAWA Made in Japan4400W 1500RMP Servo Motor SGMGH-44A2A6C

1PC Industrial YASKAWA Made in Japan4400W 1500RMP Servo Motor SGMGH-44A2A6C​


Quick Details
Brand Name:Julante
Model Number:YE2
Type: Servo Motor
Frequency: 50/60Hz
Output Power: 4.4W
Protect Feature:Totally Enclosed
Phase:Three-phase
Certification:CCC, CE, ROHS, UL, VDE, Other
AC Voltage:208-230 / 240 V
Place of Origin:Japan
Efficiency:IE 1




OTHER SUPERIOR PRODUCTS

Similar Products

This amplified error signal acts as the input power of the DC motor and the motor starts rotating in desired direction. As the motor shaft progresses the potentiometer knob also rotates as it is coupled with motor shaft with help of gear arrangement. As the position of the potentiometer knob changes there will be an electrical signal produced at the potentiometer port. As the angular position of the potentiometer knob progresses the output or feedback signal increases. After desired angular position of motor shaft the potentiometer knob is reaches at such position the electrical signal generated in the potentiometer becomes same as of external electrical signal given to amplifier. At this condition, there will be no output signal from the amplifier to the motor input as there is no difference between external applied signal and the signal generated at potentiometer. As the input signal to the motor is nil at that position, the motor stops rotating. This is how a simple conceptual servo motor works.

EEP-ROM life
The number of write times to the EEP-ROM, which stores parameter settings, etc., is limited to 100,000. If the total number of the following operations exceeds 100,000, the servo amplifier and/or converter unit may fail when the EEP-ROM reaches the end of its useful life.
Write to the EEP-ROM due to parameter setting changes
Home position setting in the absolute position detection system
Write to the EEP-ROM due to device changes
Write to the EEP-ROM due to point table changes
Execution of forced stop, shut off of main circuit power

• Determine the size, mass, coefficient of friction, and external forces of all the moving part of the Servo Motor the rotation of which affects

• Determine the operating pattern (relationship between time and speed) of each part that must be controlled.

• Convert the operating pattern of each controlled element into the motor shaft operating pattern.

• The elements of the machine can be separated so that inertia can be calculated for each part that moves as the Servo Motor rotates.

• Calculate the inertia applied to each element to calculate the total load inertia of the motor shaft conversion value.

• Calculation of Friction Torque Calculates the frictional force for each element, where necessary, and converts it to friction torque for a motor shaft.

• Calculation of External Torque Calculates the external force for each element, where necessary, and converts it to external torque of a motor shaft.

• Calculates the total load torque for the motor shaft conversion value

• Select a motor temporarily based upon the motor shaft converted load inertia, friction torque, external torque and r.p.m of a motor.

FOR MAXIMUM SAFETY
These products have been manufactured as a general-purpose part for general industries, and have not been designed or manufactured to be incorporated in a device or system used in purposes related to
human life.
Before using the products for special purposes such as nuclear power, electric power, aerospace, medicine, passenger movement vehicles or under water relays, contact Mitsubishi.
These products have been manufactured under strict quality control. However, when installing the product where major accidents or losses could occur if the product fails, install appropriate backup or failsafe functions in the system.


ELECTRICAL SPECIFICATIONS
INSULATION: CLASS B (130° C)
VOLTAGE RATING: 6-48 VOLTS DC NOMINAL
EFFICIENCY: UP TO 75%
ROTATION: CW, CCW, OR REVERSIBLE
BRUSH LIFE: UP TO 2,000 HOURS DEPENDING
ON MODEL AND APPLICATION
UP TO 5,000 HOURS WITH SPECIAL
BRUSHES & COMPONENTS
MECHANICAL SPECIFICATIONS
SHAFT: 1137-1144 CRS (STANDARD)
300/400 SERIES SS OR
CUSTOM AS REQ’D
BEARINGS: PM IRON (STANDARD)
PM BRONZE OR
BALL BEARINGS OPTIONAL
LUBRICATION: SYNTHETIC, LIFETIME LUBRICATED
LEADS: 16GA AWG TYPE GPT (80° C) (STANDARD)
OTHER GAUGES OR
HIGHER RATINGS AS REQ’D
WIRE TERMINATIONS: 1/4˝ STRIP (STANDARD)
OTHER TERMINALS
(I.E. #10 RING, BULLET) AS REQ’D

Shenzhen Wisdomlong Technology CO.,LTD Mainly engaged in automation parts, PLCS,DCS,sensors, relays, dirves,encoder, servo drive,soft starter,touch screen,instrument,process control,electric transmission and factory automation aspects of the project design,software programming,technical service and staff training. Our company locats at the central of China,Shenzhen, Guangdong Province. With rapid development, Wisdomlong serves fields of automation in global markets, Our business covers five continents throughout the world with the basic conviction of honest, the international management of customer-centered concept and purpose of bringing convenience to customers. We have confidence to bring our customers more substantial profit with high-quality service and reasonable prices. Choosing us,you will choose a sincere friend and reliable partner. Please feel free to contact us if you are a global manufacturer of high quality brand products who desires to enter the Chinese market or who searches for a Chinese agent.We would like to create a brilliant future with friends in domestic and overseas. All goods sold have one year warranty.

The company with domestic and international numerous well-known brands supplier to build have extremely good relations of cooperation, in Japan, South Korea, southeast Asia, Africa, Europe and the United States, and formed a stable and efficient supply network. The agent and the products are widely used in machinery, equipment manufacturing, electric power, metallurgy, petrochemical, automobile manufacturing industry, paper making, chemical industry, medicine and aerospace industries.

Our Main Brand:

MITSUBISHI

YASKAWA

PANASONIC

GE FANUC

EMERSON

FISHER-ROSEMOUNT

HONEYWEL

ABB

AB

SHNEIDER MODICON

SIEMENS

................