380V Wall Panel Roll Forming Machine , GI PPGI Steel Profile Making
Machine High Speed
Description of Wall Panel Roll Forming Machine:
Wall and roof panel roll forming machine is mainly producing steel
roof/ wall sheet .The final products have two types,corrugated
sheet and trapezoidal sheet. As we know, steel roof/ wall sheet is
widely used in large span factory building, warehouse, office
buildings, villas, roof, cold storage, air purification room,
stores, kiosks, and temporary housing..
The wall and roof roll forming machine can work 16-24 hours per
day, motor perform good.
(1) Material Thickness: 0.3-0.8mm PPGI and GI
(2) NO. of roller Stations: 18groups
(3) Material for Rollers: high grade 45# steel polished and coated
with chrome HRC55-60°
(4) Material for shaft: high grade 45# steel polished and coated
with chrome HRC55-60°
(5) Diameter of shaft: 70mm
(6) Frame panel thickness: 20mm
(7) Bottom frame: 350 H-section steel
(8) Motor Power: 5.5kw
(9) Driven type: 1.0＂Chain
Specification / Technical Parameter
| 1 | Suitable raw material | PPGI/PPGL/GI/GL Steel Coils |
| 2 | Thickness of coil sheet | 0.3-0.8mm |
| 3 | Feeding Coil width | 1000mm/1200mm |
| 4 | Effective width | 800mm/1000mm |
| 5 | Under frame | 350H-beam |
| 6 | Diameter of Soild shaft | 70mm, high grade 45# steel, finish turning, cylindrical grinding,
with keyway |
| 7 | Roller | High grade 45# steel, processed by CNC lathe, Quenched and tempered
treatment, hard chrome coated 0.05-0.07mm |
| 8 | Thickness of middle plate | Guide pillar memorial archway |
| 9 | Forming stations | 16 |
| 10 | Drive type | By chain(1.0 inch) link bearing model 6210 |
| 11 | Power of main motor | 4kw with Cycloidal reducer, Lichao, Shanghai |
| 12 | Power of pump station | 4kw, Lichao, Shanghai |
| 13 | Forming speed | About 15-20m/min |
| 14 | Hydraulic cutting | Controlled by PLC |
| 15 | PLC | DELTA, TAIWAN / Mitsubishi, Japan |
| 16 | Material of cutting blade | Cr12Mov, quenching 58-62℃ |
| 17 | Frequency converter | It has the advantage of slowing down before cutting, to ensure the length accuracy(±1mm, far better than industrial standard ±3mm). |
| 18 | Switch | CHNT |
Components of glazed tile roll forming machine:
| Decoiler | 1set |
| Feeding & guiding device | 1set |
| Main roll forming machine | 1set |
| Hydraulic cutting system | 1set |
| Controlling system | 1set |
| Run out table | 1set |
Installation and Training:
① If buyers visit our factory and check the machine, we will teach
you how to install and use the machine, and also train your
workers/technician face to face.
② Without visiting, we will send you user manual and video to teach
you to install and operate.
③If buyer needs our technician to go to your local factory,please
arrange round trip tickets, food and hotel and everyday salary
USD100, visa cost and necessary things.
FAQ:
1. How to get a quotation?
a.Give me the profile drawing and thickness,this is the important.
b.Other specific requirements is welcome, such as the speed,power
and voltage you want.
2. Terms of payment:
30% T/T, Balance to be paid before shipping delivery.
3. What can you do if the machine broken?
Our machine's warranty period is 12months,if the broken parts can't
be repaired,we can send new to replace for free,but you need to pay
the express cost yourself. after warranty period,we can negotiate
to solve the problems,we supply the technical support for the whole
life of the equipment.
