Durable Roof Building Roll Forming Machine , Steel Colored Glazed
Tile Making Machine
Description of Glazed Tile Roofing Building Making Machine:
(1) Material Thickness: 0.3-0.8mm PPGI and GI
(2) NO. of roller Stations: 18groups
(3) Material for Rollers: high grade 45# steel polished and coated
with chrome HRC55-60°
(4) Material for shaft: high grade 45# steel polished and coated
with chrome HRC55-60°
(5) Diameter of shaft: 70mm
(6) Frame panel thickness: 20mm
(7) Bottom frame: 350 H-section steel
(8) Motor Power: 5.5kw
(9) Driven type: 1.0＂Chain
(10) Speed: 4m/min
Machine Components of Roll Forming Machine:
1. Decoiler ---------------------------------------------- 1 Unit
2. Feeding guide -------------------------------------- 1 Unit
3. Main roll forming machine ------------------------ 1 Unit
4. Hydraulic pressing device -------------------------1 Unit
5. Hydraulic cutting device --------------------------- 1 Unit
6. Hydraulic Station ----------------------------------- 1 Unit
7. PLC computer control ------------------------------1 Unit
8.Output tables ---------------------------------------- 2 Units
Specification / Technical Parameter
| 1 | Suitable raw material | PPGI/PPGL/GI/GL Steel Coils |
| 2 | Thickness of coil sheet | 0.3-0.8mm |
| 3 | Feeding Coil width | 1000mm/1200mm |
| 4 | Effective width | 800mm/1000mm |
| 5 | Under frame | 350H-beam |
| 6 | Diameter of Soild shaft | 70mm, high grade 45# steel, finish turning, cylindrical grinding,
with keyway |
| 7 | Roller | High grade 45# steel, processed by CNC lathe, Quenched and tempered
treatment, hard chrome coated 0.05-0.07mm |
| 8 | Thickness of middle plate | Guide pillar memorial archway |
| 9 | Forming stations | 16 |
| 10 | Drive type | By chain(1.0 inch) link bearing model 6210 |
| 11 | Power of main motor | 4kw with Cycloidal reducer, Lichao, Shanghai |
| 12 | Power of pump station | 4kw, Lichao, Shanghai |
| 13 | Forming speed | About 15-20m/min |
| 14 | Hydraulic cutting | Controlled by PLC |
| 15 | PLC | DELTA, TAIWAN / Mitsubishi, Japan |
| 16 | Material of cutting blade | Cr12Mov, quenching 58-62℃ |
| 17 | Frequency converter | It has the advantage of slowing down before cutting, to ensure the length accuracy(±1mm, far better than industrial standard ±3mm). |
| 18 | Switch | CHNT |
Installation and Training:
① If buyers visit our factory and check the machine, we will teach
you how to install and use the machine, and also train your
workers/technician face to face.
② Without visiting, we will send you user manual and video to teach
you to install and operate.
③If buyer needs our technician to go to your local factory,please
arrange round trip tickets, food and hotel and everyday salary
USD100, visa cost and necessary things.
| Working conditions |
| 1.working size | 25m x 2m x 4m |
| 2.Power supply | 8.5kw |
| 3.Frequency | 50-60HZ |
| 4.Wires/cables | 4-6mm²(length according to workshop) |
| 5. Labor cost | 2 workers |
| 6. Tools | Spanners and screwdriver |
| 7.Lift device | 3-5t forklift or crane |
