※ ZJZ Automatic glue station system
※ structural feature:
★ The system does not use the system stabilizer paste, paste and
liquid infiltration and paste liquid stable, long-term storage is
not hierarchical.
★ The whole system was controlled by setting the program, and the
control system software is the company's own design and development
according to the actual needs of each carton factory, stable and
reliable.
★ All material is added through the program settings, complete PLC
control, measurement precision.
★ The system is equipped with temperature sensors and temperature
display and control temperature glue to ensure that the starch
molecules are more soluble in water, while avoiding the quality of
the glue and have a greater impact by ambient temperature changes.
★ The device has an automatic wash tank program, after each
delivery finished glue, self-cleaning tank.
★ Each point with plastic tank level sensor to monitor the
implementation level, low level PLC automatically selected,
depending on the recipe paste glue points.
★ Shearing, mixing time is set by the program controlled by the
PLC.
★ After the caustic soda into caustic soda, stored in a tank in
lye; lye tank level transit level controlled by the PLC, when it
reaches the lower limit set by the lye tank pump automatic
replenishment.
★ When the starch material level down to the tank level sensor, the
system automatically alarm and vibration add materials to add
material.
★ Sent glue by pneumatic diaphragm to glue storage tank
automatically, controlled by the PLC control.
※ technical parameters:
1, steam pressure 8-10kgf/m2.
2, Water pressure 5-6kgf/m2.
3, Compressed air pressure 4-7 kgf/m2.
4, The maximum consumption of compressed air 105m3/h.
5, Total power 32KW.
6, Viscosity Changes within ± 2s.
7, Pasting temperature Changes within ± 1 ℃.
8, Glue time 30min above.
9, The maximum amount of each glue 1650 kg, the minimum amount of
glue 750kg
