Industrial Yaskawa Electric New AC Servo Motor 550W 4A SGMDH-06A2A-YR12

This is where the gear system inside a servomechanism comes into the picture. The gear mechanism will take high input speed of the motor (fast) and at the output, we will get an output speed which is slower than original input speed but more practical and widely applicable. Say at initial position of servo motor shaft, the position of the potentiometer knob is such that there is no electrical signal generated at the output port of the potentiometer. This output port of the potentiometer is connected with one of the input terminals of the error detector amplifier. Now an electrical signal is given to another input terminal of the error detector amplifier. Now difference between these two signals, one comes from potentiometer and another comes from external source, will be amplified in the error detector amplifier and feeds the DC motor.

This amplified error signal acts as the input power of the DC motor and the motor starts rotating in desired direction. As the motor shaft progresses the potentiometer knob also rotates as it is coupled with motor shaft with help of gear arrangement. As the position of the potentiometer knob changes there will be an electrical signal produced at the potentiometer port. As the angular position of the potentiometer knob progresses the output or feedback signal increases. After desired angular position of motor shaft the potentiometer knob is reaches at such position the electrical signal generated in the potentiometer becomes same as of external electrical signal given to amplifier. At this condition, there will be no output signal from the amplifier to the motor input as there is no difference between external applied signal and the signal generated at potentiometer. As the input signal to the motor is nil at that position, the motor stops rotating. This is how a simple conceptual servo motor works.

There is no need to worry about damage to your products during transport. We know how important it is to deliver a product safely. Thanks to our long-term cooperation with UPS, we have developed innovative ways of securing devices for transport.

We use three types of packaging for sending devices:

WOODEN CRATE DESIGNED FOR SERVO MOTORS FOR MAXIMUM SAFETY. BY SECURELY FIXING OUR PRODUCTS, WE ENSURE THAT THEY REACH OUR CUSTOMERS IN PERFECT CONDITION.
INSTAPAK - SPECIALLY SELECTED POLYURETHANE FILLER ADAPTS TO THE SHAPE OF THE DEVICE FOR MAXIMUM PROTECTION

DEDICATED PALLET DEVICES WITH NON-STANDARD DIMENIONS OR WEIGHT, ARE TRANSPORTED ON DEDICATED PALLETS, ALLOWING FOR THE SAFE SHIPPING OF LARGE EQUIPMENT.