RH3032HT® High-Temperature Conductive Silicone Rubber High Resistance to 300℃ for Mechanical Seals
Description
RH3032HT is a kind of solid silicone rubber, catalyzed by DBPH.
It can be used in the mechanical parts usually worked at high
temperature.
Key Features and Benefits
- Excellent dielectric behavior over a wide range of temperatures
- High thermal stability
- Easy pigmentable with the LSR Color Pastes
- High stability to ozone and ultraviolet light
- Outstanding aging behavior
- Neutral odor and taste
- Good rebound property
- Rapid vulcanization
- Sensational weather resistance
Typical Properties
| RH3032HT® |
| Unit | Part - A | Part - B |
| Appearance | / | translucent | translucent |
| Shore A Hardness | A | 28-33 |
| Tensile Strength | MPa | ≥ 7.0 |
| Elongation | % | ≥ 650 |
| Tear Strength | KN / m | ≥ 10 |
| Linear Shrinkage | % | ≤ 0.5 |
These figures are for reference only, please contact us for
details.
Vulcanization: 150 °C / 5 min
Curing method: DBPH curing
Applications
Because of the outstanding properties RH3032HT® solid silicone
rubber is particularly suitable for swimming caps, food wrappers,
and shower heads.
Operation ways of Injection Molding
1. Mixed: Part A (based glue) and Part B (curing agent) ratio of
10:1 or 1:1 by weight, mixed, mixed either manually or using the
equipment.
2. Vacuuming: mixed silicone A and B, When used in small amounts
can be in a vacuum desiccator under vacuum, the volume will foamed
plastic material can be increased 4-5 times, so degassing vessel
volume should be less than bulky plastic material 4 to 5 times,
after a few minutes gel volume returns to normal, no air bubbles
escaping when the surface (about 10 minutes) to complete the
degassing step.
3. Clean your Original mold (sex toys molds), pls note that, the
molds won’t contact with condensation silicone rubber before, and
not contains a chemical element such as N.S.P, otherwise the
silicone won’t be cured.
4. Pour the silicone rubber into your sex toys molds.
5. Cured the silicone rubber at 80℃ to 120℃, then the silicone will
be cured, and then de-mold.
Certificate
Rui-He RH3032HT® solid silicone rubber obtained the following test
certificate: RoHS, FDA, REACH, PAHS, ISO9001:2016, etc.
Packaging & Storage
Available packed in 20 kg cartons.
Store in a cool, dry place out of direct sunlight, use it within 12
months from the day of manufacture.
Notice
This product cannot be contacted with compounds containing N, P, S
to avoid affecting the catalytic effect of platinum.
If you need to know the prices of our silicone rubbers, please
contact us. We do not provide prices on the website because prices
fluctuate for many reasons.
