Platinum Cure Customized Compound Silicone Rubber for Profiled Bars
On Automobiles With ISO9001
Rui - He RH7022P® is a kind of solid silicone rubber for extrusion processes,
catalyzed by platinum. This silicone rubber is particularly
developed for manufacturing all kinds of extruded tubes and
profiled bars.
Typical Properties
| RH7022P® |
| Unit | Part - A |
| Appearance | / | translucent |
| Shore A Hardness | A | 70-75 |
| Tensile Strength | MPa·s | ≥ 6.0 |
| Elongation | % | ≥ 150 |
| Tear Strength | KN / m | ≥ 8.0 |
| Linear Shrinkage | % | ≤ 0.5 |
| Plasticity | % | 250-290 |
These figures are for reference only, please contact us for
details.
Why should you choose RH7022P?
| Fantastic extrusion performance |
| High resistance to yellow |
| Excellent stability and flexibility at low temperatures |
| Outstanding aging behavior |
| Sensational weather resistance |
| High stability to ozone and ultraviolet light |
| excellent dielectric behavior over a wide range of temperatures |
| Easy pigmentable with the LSR Color Pastes |
Packaging & Storage
Available packed in 20kg cartons.
Store in a cool, dry place out of direct sunlight, use it within 12
months from the day of manufacture.
Certificate
Rui-He RH7022P® silicone rubber obtained the following test certificate: RoHS,
FDA, REACH, PAHS, ISO9001:2016, etc.
Applications
Because of the outstanding properties RH7022P® silicone rubber is particularly suitable for tubes, bars, cold
shrinkage termination, insulation tube, joint, and breakout.
FAQ
Q: Does the silicone mold get burnt out?
A: Our silicone rubber has added a special material which can
increase its resistance to high temperature. However, it gets heat
when added the curing agent. You ought to demold the product within
3 minutes to avoid this problem.
Q: Why is the silicon mold oily?
A: The molding silicone rubber itself doesn’t contain any oil, so
it won’t be oily. If the mold is oily, it may be because of two
reasons:
You add the compound silicone oil (the compound of silicon oil and
white oil). The white oil is not silicon oil but a kind of
petrochemicals.
Your supplier adds to much silicone oil when they producing
silicone rubber or reducing the hardness of silicone rubber.
Q: Why does the silicone rubber appear to be dry outside but wet
inside?
A: It gets solidified after absorbing moisture from the air. You
can add 0.05% water into the silicon rubber and stir over a low
speed briefly when you use it.
Notice
This product cannot be contacted with compounds containing N, P, S
to avoid affecting the catalytic effect of platinum.
If you need to know the prices of our silicone rubbers, please
contact us. We do not provide prices on the website because prices
fluctuate for many reasons.
