Aircraft Super Alloy Steel Plate , Hastelloy Sheet B 3 UNS N10675 W.Nr.2.4600 High Stability

super alloy Alloy B-3 Hastelloy B-3 UNS N10675 W.Nr.2.4600 Plate Sheet Strip Coil

1. (Hastelloy B-3) Plate,sheet,Strip, Foil, Wire, ASTM B333

Applications

Aircraft, furnace and chemical process components, honeycombs and gas turbine combustion section components

Description

Hastelloy® B-3 is a nickel- molybdenum alloy with excellent resistance to pitting, corrosion and stress-corrosion cracking, plus thermal stability superior to that of alloy B-2. This alloy has also great resistance to knife-line and heat-affected zone attack. The improved thermal stability of B-3 alloy minimizes the problems associated with fabrication of B-2 alloy components. This is due to the reduced tendency to precipitate deleterious inter-metallic phases in B-3 alloy, thereby, affording it greater ductility than B-2 alloy during and following various thermal cycling

conditions.

Chemistry Typical

Nickel: 65.0 min
Chromium: 1.00-3.00
Molybdenum: 27 .00-32.00
Iron: 1.0-3.0
Cobalt: 3.0 max
Tungsten: 3.0 max
Manganese: 3.0 max
Aluminum: 0.50 max
Titanium: 0.20 max
Silicon: 0.10 max
Carbon: 0.01 max
Copper: 0.20 max

Physical Properties

Density: 0.333 lbs/in3, 9.22 g/cm3

Electrical Resistivity: microhm-in, (microhm-cm):
70 ° F (21 °C)- 53.8 (137)

Specific Heat: BTU/lbl° F (J/kg•K):
32 - 212 ° F (0 - 100 °C}: 0.089 (373)

Mean Coefficient of Thermal Expansion: in/inl° F (mm/ml°C):
70 - 212 °F (20 - 100 °C): 5.7 x 10·6 (10.6)

Thermal Conductivity: BTU-in/h-ft-° F (W/m-° K):
70 ° F (21 °C): 78 (11.2)

Modulus of Elasticity: ksi (MPa)
31.4 x 103 (216 x 103) in tension

Melting Point:

2500 - 2585 °F (1370 - 1418 °C)

2. Coil - Strip, Foil, Ribbon Wire - Profile, Round, Flat, Square

Mechanical Properties at Room Temperature

Annealed: Typical

Ultimate Tensile Strength: 125 KSI (860 MPa)
Yield Strength: (0.2% offset) 60 KSI (420 MPa)
Elongation: 50%

Tempered

Hastelloy® B-3 can be cold rolled to various tempers.

Additional Properties

Corrosion Resistance

Refer to NACE (National Associate of Corrosion Engineers) for recommendations.

3. (Hastelloy B-3) Plate,sheet,Strip, Foil, Wire, ASTM B333 Finishes

#1 - Hot rolled annealed and descaled. It is available in strip, foil and ribbon. It is used for applications where a smooth decorative finish is not required.
#2D - Dull finish produced by cold rolling, annealing and descaling. Used for deep drawn parts and those parts that need to retain lubricants in the forming process. #2B - Smooth finish produced by cold rolling, annealing and descaling. A light cold rolling pass is added after anneal with polished rolls giving it a brighter finish than 2D.
#BA- Bright annealed cold rolled and bright annealed
#CBA- Course bright annealed cold rolled matte finish and bright anneal
#2 - Cold Rolled #2BA- Smooth finish produced by cold rolling and bright annealing. A light pass using highly polished rolls produces a glossy finish. A 2BA finish may be used for lightly formed applications where a glossy finish is desired in the formed part. Polished - Various grit finish for specific polish finished requirements.

* Not all finishes are available in all alloys - Contact Ulbrich Sales for more information.

Wire Finishes

XC - Extra Clean Bright Annealed or Bright Annealed and Cold Rolled Grease - Ultra bright finish (for decorative applications) Soap - Soap coating on tempered wire to act as lubricant.

* Contact Ulbrich Wire for custom wire finishes.

Heat Treatment

Hastelloy® B-3 cannot be hardened heat treating.

Welding

For best results refer to: SSINA's "Welding of Stainless Steels and Other Joining Methods".

4. Types of Hastelloy B3 Sheets, Plates & Coils

5. HT PIPE exports ASTM B333 Hastelloy Alloy B3(UNS N10675) Strips, Sheet & Plate

To Saudi Arabia, UAE, Bahrain, China, Peru, Nigeria, Jordan, Muscat, Kuwait, Dubai, Thailand (Bangkok), Venezuela, Germany, Canada, Russia, Australia, Vietnam, Kazaksthan, Jiddah, Libya, Yemen, Algeria, Qatar, Oman, Iran, United States Of America, United Kingdom, Australia, South Africa, Mexico, Turkey, France, European Union, New Zealand, Angola, Congo, Kenya, Lebanon, Spain, Indonesia, Malaysia, Lebanon, Iraq, Iran, Egypt, Madagascar, Sri Lanka, Denmark, Poland, Italy, Brazil, Sudan, Singapore And Netherlands.

Huitong Group was established in 1978. After 38 years'development and innovation,by now,Huitong Group has set up multiple subsidiary companies.Among them,Zhengzhou Huitong Pipe Fitting Co.,Ltd.,with the indepent right of import and export, is mainly engaged in exporting steel pipe and pipe fittings for Huitong Group and assisting another subsidiary company of Huitong Group:Zhengzhou Huitong Machanical Equipment Co.,Ltd., in exporting machanical equipment.

Zhengzhou Huitong Pipeline Equipment Co.,Ltd.,with the strong support of Huitong Group,and years'development and innovation, are more and more professional in technical service and can manufacure products with all kinds of material,shape and size. Especially in elbows, tee, reducer, flange and pipe cap etc., we have gained more than 20 product patent, and hundreds of technology patent. Also,we have gradually taken an ireplacable role in High-pressure,high-temperature and anti-corrosion area. With the continuous construction of engery in China,such as petrol gas,electric power,etc.,our company has become the purchasing center of whole set fittings for such projects.In 2009,a foreign trade team established,is manily engaged in oil gas and electric power projects abroad.By now, our products have been exported to

Canada,Malaysia,Parkistan,UAE, Eygpt,the Middle East countries, etc.. We have passed the qualification of ISO9001:2000 and API quality certification system. High-quality products and high-class service are well received by abroad customers in this industry. The unique diversified production line can offer you one-package serive, you can pruchase all complex products from us at one time. What's more, our sufficient material stock and conventional product stock can ensure you receive satisfied product in the shortest time.

With powerful financial strength,advanced managerial concept, excellent marketing service,strict quality control system and integrated marketing team,we would like to develop together with you hand in hand. Adhering to the operation principle of "faith first and clients foremost", we always supply high quality products, complete after-sales service and favorable prices. We sincerely hope to establish long-term cooperation with you on the basis of mutual benefits, reciprocity and common development.

People who interested in our products or want to get more information about us,contact us,please!Looking forward for your inquiry.