1250Ton Servo Hydraulic Press Machine for automobile parts deep
drawing belongs to ZHENGXI Yz27 series which mainly be used on metal
forming technology, also called metal stamping press, sheet metal
deep drawing press or H frame type hydraulic press.
Application
ZHENGXI 1250Ton Servo Hydraulic Press Machine for automobile parts
deep drawing have multi-function can process sheet metal including
technology like deep drawing, stamping, bending, cutting and
flanging. It is widely been used to the followin area.
- Automobile industry: vehicle body cover, door, automobile hub, battery cover, chasis,
fule tank. Can be also used for other vehicles like tractor,
motorcycle, wheelbarrow.
- Electric products industry: refrigerator, air condition, microwave oven, washing machine and
more.
- Kitchen ware industry: kitchen sink, metal cookware, LPG cylinder
Key Features
- The nominal force capacity of servo hydraulic press available up to
3500Ton as per customer's requirments
- The servo hydraulic press equipped with special servo motor which
gives up to 70% energy saving rate, Max. position accuracy reaches
±0.005mm and Max. force control accuracy reaches ±0.1 Mpa
- Drive control is optional, can be servo control system which
special designed for hydraulic press, or PLC control.
- 7 or 10 Inch industrail touch screen provides easy operation.
Parameters of 1250Ton Servo Hydraulic Press Machine for automobile
parts deep drawing
| Item | Unit | Yz27-1250TSF |
| Nominal Force | KN | 12500 |
| Max. Liquid Working Pressure | MPA | 25 |
| Hydraulic Die Cushion Force | KN | 5000 |
| Max. Daylight | MM | 1800 |
| Max. Stroke of slide | MM | 1300 |
| Max. Die Cushion Stroke | MM | 400 |
| Slide Speed | Fast Approach | MM/S | 500 |
| Pressing | MM/S | 10-30 |
| Fast Return | MM/S | 300 |
| Worktable Size | L-R | MM | 3600 |
| F-B | MM | 2200 |
| Hydraulic Die Cushion Size | L-R | MM | 3000 |
| F-B | MM | 1600 |
| Motor Power | KW | 190 |
Safety Device
1) emergency stop button: press the "emergency stop" button, the
hydraulic system, including the motor, will stop running. The press
is equipped with two emergency stop buttons, one on the operation
control panel and the other on the mobile operation table. In any
state and situation, press any one of the emergency stop buttons,
and the press stops immediately.
2) Two-handed operation button: Press the synchronization time with
both hands within 0.5S, if it exceeds, it will be invalid.
3) Hydraulic Support Safety Circuit: In order to prevent the slider
from going out of control, a hydraulic double-support safety valve
circuit is installed in the lower chamber of the piston main
cylinder to ensure safety. The hydraulic interlocking circuit is
set to ensure that the upper chamber of the main cylinder can not
be pressurized when the supporting safety valve is not opened.
4) The machine is equipped with power supply, work and other
indicators.
5) Longitudinal adjustable safety grating protection device is
installed on the front of the press with adjustable position and
600 mm protection height.
6) Overload protection: The hydraulic system is equipped with a
safety valve, which automatically overflows and discharges oil when
the oil pressure exceeds the set value (adjustable), and sends an
alarm signal at the control box.
7) Electrical system protection, motor overload protection and
short-circuit protection, control circuit short-circuit protection
and system alarm function.
8) Touch screen displays all solenoid valves and travel switches
for monitoring.
On-site production photo of 1250Ton Servo Hydraulic Press Machine
for automobile parts deep drawing
