Description of pneumatic vacumm low pressure calibrator
Y061 vacuum pressure hand pump is a quick hand pressure source,
suitable for checking various vacuum gauges, also can be field
calibrated for differential pressure transmitters, sensors, gauges
and vacuum gauges. and also can be used as vacuum pressure source
of the above pressure instrument. Also as a drain.
The vacuum pump can be directly connected with the instrument to
calibrate in the field, quick and simple. It is an ideal
calibration instrument for instrument inspection personnel.
The vacuum pump (see diagram) consists of a buffer valve, a
connector, a gas release valve, a cylinder, a piston rod and a
handle, and a connecting hose. The M14*1.5 table connector
installed on the top of the vacuum pump is connected to the vacuum
gauge.
When operating the vacuum pump, the bleed valve shall be tightened
clockwise first, then the handle shall be gripped by hand, and the
handle shall be repeatedly tightened and relaxed to make the piston
rod reciprocate so that the vacuum pump will generate negative
pressure.
Features of pneumatic vacumm low pressure calibrator
Characteristic of compact size, light weight, easy to operate, hand
held, can can be matched to vacuum pressure instrument.
Specification of pneumatic vacumm low pressure calibrator
| Pressure range | -0.088~0MPa | Weight | 1Kg |
| Temperature | 0~40℃ | Relative humidity | 5~95% |
| Dimension | 220*110*60mm |
Detailed Images of pneumatic vacumm low pressure calibrator
