3 in 1 Servo Metal Sheet Straightening Feeder Automatic Metal Stamping Machine

Causes and solutions for inaccurate feeding of air feeder:

1. The speed is too fast and the feeding is not allowed.

Solution: Turn the air feeder speed adjustment screw clockwise to lower the feed rate.

2. If the step setting is incorrect, the feeding will be inaccurate.

Solution: Adjust the feed length fine adjustment screw and speed adjustment screw, and reset it. After designing, be sure to re-lock the fine adjustment screw.

3. The external air pressure is unstable (the air pressure is too large or insufficient), causing the feed to be inaccurate.

Solution: Check the three-point combination pressure gauge for no damage and adjust the air compressor.

4. There is an error in the mold itself, resulting in inaccurate feeding. Solution: Recalibrate the punch mold.

5, the mold itself has no guiding positive pin caused by the feed is not allowed. Solution: Modify the pilot pin.

6. After the long-term use of the air feeder splint, the wear is seriously caused, and the feeding is not tight, resulting in inaccurate feeding.

Solution: Flatten the splint.

7. The material is too thin or the toughness is insufficient to cause the feed to be inaccurate.

Solution: The guide tray can be installed on the air feeder or converted into a pull-type, one-to-one pull-type air feeder.

8. When the material is fed, the belt is skewed and the unevenness causes the feeding to be inaccurate.

Solution: Re-adjust the height of the air feeder and the feeding position so that it is horizontal and vertical with the punching die.

9. The air feeder has a long downtime, resulting in inaccurate feeding.

Solution: When the temperature is too low and the downtime is more than 12 hours, the air feeder must be preheated when the continuous feeding is completed after commissioning.

The preheating method is to leave the material at a slow speed for 3 to 5 minutes (the lower the temperature, the longer the hotter time), and the continuous automatic feeding can be carried out after the preheating is completed.

Specification:

Straigtening performance:

*1:(Pneumatic):Option in case of pneumatic mandrel expansion is provi

RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the original design standard, and into each manufacturing process. In 20 years has accumulated experience and excellent design ability of Japanese engineers guided ruihui highly responsible for Industry and ruihui strong executive team, created a batch of well-known auto parts manufacturers, allowing them to reach the high level in same industry，and investment less.

Customer case

Manufacturing industry; the United States Lear, Honda factory, Ford factory, GAC Group, Chongqing Changan, Wuhan Shenlong, BMW Brilliance, FAW Volkswagen, Beijing Hyundai.

And other household appliances manufacturers; such as GREE, Haier, Midea, Chigo Air conditioning.

hardware manufacturers; such as the United States Southco, are Zhongtai industrial manufacturers success cooperation case.

RUIHUI QUALITY is not the best in the world, and the price is not the cheapest. But we can provide excellent products to help you defeat your competitors.

Products: Feeder machine, Straightener machine, Uncoiler machine, Decoiler with Straightener, 3 in 1 NC Straightener Feeder, Coil handling system, Transfer system, Robot System, to meet the market needs of customers, improve work efficiency, reduce the burden of enterprise management personnel, maintenance of production safety and the customer staff made a significant contribution.

At present the company to further develop the market, at the end of 2017, the total investment reached 30 million USD, plant area of more than 20 thousand square meters, in order to meet the demand on the market and lay a solid foundation after.

Why choose us?

1^st,We have a high level of technical research and development team;

2^nd,We can provide the design and planning of the whole plant to realize the turnkey project;

3^rd, our philosophy: quality is the social responsibility;

4^th,our products have been recognized by the market, in the major automotive OEM, home appliance industry, hardware industry has been applied;

5^th,We have a highly effective after-sales service team and get customer approval.