CZ Purlin Roll Forming Machine With Gcr15 Roller / Chain Drive PLC
Control
Description
Purlin is widely using in industry building. The machine can forms
different size through change some rollers position. And also can
punch and cut automatically as setting.
Main Advantages
1. High speed:4- 10m/min( Including punching and cutting time)
2. High Quality with low price
3. Online punching, we can even punch the holes on the two flanges.
4. From C to Z or C to Z without changing the rollers, only needs
to press the button on the touch screen.
5. Universal blade for all the C&Z sizes. There's no NEED for
changing the blade, only need to adjust the screws. It will save
too much time during the changeover size.
6. Stable strutures: using H-beam for the under frame, and the
thickness of the side plate for holding the shafts is over 50mm.
7. The rollers are using bearing steel, do quenching treatment
after CNC. It can be used for over 5 years without losing shapes.
8. Long life working time
9. Good after service: We will provide after sale services all
year. We two techicians special for after sale serivces, they stay
outside all year to do services.
Technicial Speciafication
| 1 | Suitable material | GI,Mild Steel |
| 2 | Main motor type | 380V,50HZ,3Phase |
| 3 | Motor power | 15kw |
| 4 | Thickness of raw material | 1.5-3.0mm |
| 5 | Speed of forming | 8 - 12m/min (according to punching) |
| 6 | Measure tolerance | ±1.0mm |
| 7 | Material of roller | GCr15,quench treatment |
| 8 | Roller stations | 18 groups |
| 9 | Material of main shaft | 40Cr temper treatment |
| 10 | Diameter of main shaft | ø75mm |
Main Components of the Machine
1. Hydraulic Decoiler with Breaking device is equipped for coil
processing.
2. Leveler
3. Hydraulic punching system
4. Pre Shearing System
5. Rollformer with tooling
6. Run Out Table or automatic stacking device
7. Panasonic (Japan) PLC and MCGS touch screen are used for data
processing and setting.
8. Roll forming speed is 8 - 12m / min.
Pictures of the product:
