Ture colors and british hexagonal bolts 38mm length
Products Description:
1. The six angle bolt is a fastener consisting of fingers and
screws. The bolts are divided into iron bolts and stainless steel
bolts according to the material, namely the six angle head bolts
(partial threads) -C and six angle bolts (full thread) -C level
2. According to the shape of the head six head, round, square head,
countersunk head, and so on in connection to the smooth surface
without protruding place head heavy, because the countersunk head
can be screwed onto the parts. Also can be screwed into the round
parts. With the tightening force can be bigger, but the large size
six. The head is the most commonly used angle
3. In addition, there are special uses: T grooved bolts, the most
commonly used machine tool clamps, the shape is special, and the
sides of the head should be cut off. The anchor bolts are used to
connect the machine to the ground, and there are many kinds of U
bolts
Products Description:
1. The six angle bolt is a fastener consisting of fingers and
screws. The bolts are divided into iron bolts and stainless steel
bolts according to the material, namely the six angle head bolts
(partial threads) -C and six angle bolts (full thread) -C level
2. According to the shape of the head six head, round, square head,
countersunk head, and so on in connection to the smooth surface
without protruding place head heavy, because the countersunk head
can be screwed onto the parts. Also can be screwed into the round
parts. With the tightening force can be bigger, but the large size
six. The head is the most commonly used angle
3. In addition, there are special uses: T grooved bolts, the most
commonly used machine tool clamps, the shape is special, and the
sides of the head should be cut off. The anchor bolts are used to
connect the machine to the ground, and there are many kinds of U
bolts
