100% Virgin Raw Material Tungsten Carbide Wear Plates SGS / ISO
Certified
Tungsten Carbide Plates Features
1. 100% virgin tungsten carbide materials.
2. Sintering and ground surface.
3. Composition: WC+Co, WC+TiC+TaC+Co.
4. ISO 14001:2015
5. OEM and ODM are accepted as well.
Application:
1. Suitable for the production of cast iron rolls and high chrome
roll knife.
2. Applicable to the production of discharge plate, stamping die,
cold punching die, such as electronic stamping die.
3. Used for stamping dies. Used in the production of copper,
aluminum, stainless steel, cold rolled sheet, EI board, Q195, SPCC,
silicon steel plate, metal, standard parts, upper and lower punch
and other high-speed mold.
4. Tungsten carbide plate wear resistance is higher, suitable for
hardwood, logs, aluminum, copper rods, cast iron processing for the
production of various types of motors, electronic into the mold,
stamping electronic mold.
5. Different uses of carbide materials, material performance is
inconsistent, the use of specific purposes should be based on
appropriate materials to select carbide plate.
Recommended Grade:
| Grade | Binding phase(%) | Grain Size(um) | Density(g/cm3) | Hardness(HRA) | TRS(Mpa) |
| VKD10 | 6.0 | 1.2 | 14.7 | 89 | 2400 |
| VKD20 | 15.0 | 1.2 | 13.9 | 86.5 | 3000 |
| VKD30 | 20.0 | 1.0 | 13.5 | 86.2 | 3100 |
| VKD40 | 15.0 | 0.8 | 13.95 | 89.5 | 3600 |
| VKD50 | 7.6 | 1.2 | 14.10 | 90.2 | 3000 |
| VKD05 | 6.0 | 2.4 | 14.80 | 90.0 | 3000 |
| VKD12 | 13.0 | 1.4 | 14.15 | 89.0 | 3500 |
| VKD15 | 15.0 | 1.2 | 13.85 | 88.2 | 3800 |
