Product description
The escalator/moving walk handrail are divided into SBR (styrene
butadiene rubber), CSM (also known as Hypalon) and
NT(polyurethane).
Handrail are normally made in black for surface color, but can be
produced in red, blue, gray, yellow, and other colors to suit
customer demand.
SBR(Rubber) CSM(Hypalon) (NT(polyurethane)
There are three types of sliding layers inside the handrail of an
escalatormoving walk that touches the handrail guide rail: nylon,
polyester and cotton. The current use of polyester fabrics is
widespread.
nylon fabrics sliding layer polyester fabrics sliding layer cotton sliding layer
Performance parameter
| Item | Parameter | Remarks |
| design life time | 5-8 yeras | |
| Length tolerance | ≤±20mm | L ≤ 30mm |
| ≤±25mm | 30m < L ≤ 100m |
| ≤±0.03% | L > 100m |
| Minimum positive bending radius | ≤180mm | |
| Minimum back bending radius | ≤275mm | |
| Elongation | ≤0.1% | F=2000N |
| Straightness | ≤4mm | F=1500N, L=2m |
| Breaking force | ≥25KN | |
| Lip strength | ≥70N | 40mm Width, Extend 7mm |
| Hardness | 75±5A | Shore |
| Slip coefficient | ≤0.3 | Between galvanized steel plate |
| ≤0.3 | Between stainless steel plate |
| ≥0.6 | Between traction wheel |
| Operating temperature | -18～43℃ | Nylon slinding layre |
The escalator/moving walk handrail can be divided into C type and V
type, and C type handrail is normally used for glass balustrade in
commercial and public escalators.
See the following table for specifications and dimensions of
commonly used handrails. Contact us if the handrail band size is
inconsistent with the data below.
| Handrail Critical Dimensions |
| Product Series | Handrail Type | Surface Material | Outer Width
(W) | Outer Heigh
(H) | Lip Width (C) |
CS7223 | C | SBR | 72 | 23.5 | 38 |
| CS7624 | C | SBR | 76 | 24 | 40 |
| CS7628 | C | SBR | 76 | 28 | 38 |
| CS7928 | C | SBR | 79.2 | 28.15 | 37.5 |
| CS8027 | C | SBR | 80 | 27 | 41 |
| CS8028a | C | SBR | 80 | 28.5 | 40 |
| CS8028b | C | SBR | 80 | 28.5 | 39 |
| CS8132 | C | SBR | 81 | 31.7 | 39 |
| CS8233a | C | SBR | 82 | 33 | 33 |
| CS8233b | C | SBR | 82 | 33 | 39.5 |
| CS8235 | C | SBR | 82.5 | 35.5 | 38 |
| CS8236 | C | SBR | 82 | 36 | 42 |
| CS8835 | C | SBR | 88 | 35 | 42 |
The client will need to choose the corresponding handrail type
depending on your escalator or moving walk.
We kindly request our clients to provide us with any documents
related to the escalator handrail, e.g. technical service reports,
spare parts numbers of the handrail, drawings of the handrail
profile, OEM part number, etc. These documents can considerably
speed up an inquiry and clarify discrepancies. To avoid any risk of
providing a non-functioning handrail, complete the questionnaire
and an identification template with detailed photographs of the
handrail outer width(W),outer heigth (H), lip width(C) and markings
on the components. Please fill in the following points and handrail
templates as completely as possible. If the template deviates from
the handrail to be measured, sketch, measure and photograph the
deviation in detail.
