Cross Recessed Countersunk Head Screws/ Philip Driver CSK Head Bolt
| Standard | ANSI/ASME, EN, DIN, GB, ISO etc. |
| Size | M2-M10, support customized |
| Material | Stainless Steel,Carbon Steel, and Others |
| Grade | SS304,SS316, A4-80, A2-70; Class 4.8, 5.8, 6.8, 8.8, 10.9, 12.9 |
| Thread | UNC,UNF,BSW |
| Finish | Plain,ZincPlated(Clear/Blue/Yellow/Black),Black |
| Packing | Bulk in cartons on wood pallet or according to customer special
demand. |
| Application | Structural Steel; Metal Buliding; Oil&Gas; Tower&Pole; Wind
Energy; Mechanical Machine; Automobile: |
| |
The difference between flat head screws and countersunk screws:
1. Different contact surfaces
1)Flat-head screw: The contact surface between the flat-head screw
and the workpiece is a bit plane
2)Countersunk head screw: The contact surface between the
countersunk head screw and the workpiece is on the conical surface
2. the force is different
1) Flat-head screws: flat-head screws are stressed
2)Countersunk head screws: countersunk head screws are less
stressed
3. the combination is different
1) Flat head screws: can be used in combination with flat washers
2)Countersunk head screws: can only be used in combination with
tapered washers
4. Different ways of use
1)Flat-head screw: it can go deep into the inside of the
counterbore, or it can be exposed to the outside
2)Countersunk head screw: only inside the countersunk hole
5. the nature is different
1)Flat head screw: The axial surface of the screw body forms
axially extending screw teeth, and there is at least one groove at
the tail. Chip flutes are dug from the slots onto the screw. The
chip groove should go deep into the screw body and be higher than
the predetermined angle of the middle line, the main function is to
avoid the chip from blocking the gap
2)Countersunk head screw: The head of the screw is a 90-degree
cone, with a tool tightening groove inside, a word groove, a cross
groove, a hexagonal groove, a plum blossom groove, etc.
Advantage:
1. The corrosion resistance of our products is very good;
2. we use the raw materials are high-quality steel, product quality
and life expectancy are considerable.
3. We can provide samples for free to test the quality
4. We also provide OEM customization service for you, producing
standard and non-standard fasteners according to your drawings.
5. We provide perfect pre-sales and after-sales service.
