Aluminum Manual Pulse Spot Weld Mesh Making Wire Welder Copper
Welding Machines
Product Description
Medium frequency fixed spot welding machine is composed of body,
welding transformer, water circuit system, air circuit system,
microcomputer resistance welding machine controller, foot switch,
etc.
The standard fixed spot welding machine is match with microcomputer
resistance welding controller. The electrical base plate of the
main circuit component is installed in the welding machine body,
and the controller is hung on the left side of the welding machine.
Technical Parameters
| Items Models | DN(B)-100 | DN(B)-160 | DN(B)-200 | DN(B)-250 |
| Rated power (KVA) | 100 | 160 | 200 | 250 |
| Power input(V) | 3φAC 380V | 3φAC 380V | 3φAC 380V | 3φAC 380V |
| Max. short circuit current (KA) | 30 | 35 | 40 | 45 |
| Duty cycle(%) | 50 | 50 | 50 | 50 |
| Max. force(N) | 6000 | 6000 | 10000 | 15000 |
| Electrode length( MM) | 450 | 450 | 450 | 500 |
| Working stroke( MM) | 80 | 80 | 80 | 80 |
| Cooling consumption(L/min) | 20 | 20 | 20 | 20 |
| Max. welding capacity(MM) | 3.0+3.0 | 4.0+4.0 | 5.0+5.0 | 6.0+6.0 |
Advantages
(1) . The lowering and rising speed of the pressure head can be
adjusted at will, which alleviates the pressure impact on the work
and reduces the noise;
(2) The secondary conductor adopts the upper insulation mode, and
the insulation performance is stable and reliable;
(3) The main circuit adopts water-cooled high-power silicon
controlled rectifier module, with strong, stable and reliable
output;
(4) The water circuit elements are all made of copper and stainless
steel, and equipped with visual water flow display to display the
water flow;
(5) The operation is controlled by foot switch, with high
production efficiency and low labor intensity.
Product Structure
The Spot Welding Cycle Consists Of The Following Stages
1) Pressurization: the time from the beginning of electrode drop to
the beginning of welding current connection. This process ensures
that the electrode compresses the workpiece before power on, so
that the workpiece weld has a good contact.
2) Welding: the welding current generates heat through the
workpiece, and the welding spot is melted under the pressure to
form a melting core (i.e. nugget).
3) Maintenance: after the welding process, the electrode pressure
continues to be maintained; The molten core cools to form solder
joints.
4) Rest: the time from the lifting of electrode to the falling of
electrode again after welding.
The time settings of the above four processes are programmed by the
resistance welding machine controller. During programming, the
appropriate pressurization and rest time shall be determined
according to the working speed of the welding machine to ensure
that the electrified welding is carried out after the electrode
pressure meets the requirements, so as to ensure the welding
quality.
Images
Application
Frequently Asked Questions
1. When can you arrange shippment?
The shippment is 15 days after getting deopsit, but customized
machines should be more than 25 days.
2.Do you inspect the finished products?
Yes, each step of production products will be came out inspection
by QC department before shipping.
3.Are you factory?
Yes, we are factory, all machine is made by ourself and we can
provide customize service according to your requirement.
4.How to buy your Spot Welder?
Please send us inquiry to our email, and we will give you a PI to
send us payment.
5. How to contact you?
You can send a mail for us and call us.
6.How will you deliver my goods to me?
We always ship by air and sea in the mean time.
7.How about your transport packing? Is it possible to damage the
machine during the transportation?
We have rich experience on international transportation. All the
packing are extra thickness carton filling with protective PE foam
and waterproof membrane. No damage happened during transportation
until now.
8.What kind of payment do you accept?
T/T, Western Union, PayPal, .L/C, D/A, etc.
