Self Cleaning Function Nano Painted Exterior Design Cladding
Aluminium Composite Panel
Advantage of Nano ACP:
1) Self-cleaning: Due to the applying of Nano paints on top, any
dirt can not attach onto it easily, so there’s nearly no need for
manual cleaning.
2) Glossy efftect: Due to the extra layer of Nano paints, the gloss
rate of Nano ACP is higher than ordinary PVDF or PE coating ACP.
Thus Nano ACP can bring your building a shinny and glossy look.
Packing: In bulk or pallet
Nano Aluminum Composite Panel
Nano aluminum composite panel has the advantages of traditional
fluorocarbon aluminum composite panel, such as peeling resistance,
corrosion resistance, fading resistance. However, it is superior to
the traditional fluorocarbon aluminum composite panel in many
aspect such as stain resistance, self cleaning, acid and alkali
resistance due to the high-tech nano coating technology
Excellent Self-cleaning Properties
When nano aluminum composite panel is compared to ordinary acp
panels, we found that its surface has excellent self-cleaning
properties. Usually after half an year, the ordinary aluminum
composite panel wall surface pollution is serious due to dust and
rain.
Especially when the poor quality assurance silicone sealant used in
some projects have been immersed in rain for a long time, and a
large amount of black ink is discharged from the joints, which is
not only difficult to clean, but also seriously affects the
appearance of the wall.
Now the nano aluminum composite panel has greatly solved this
problem. Because its tension of the coating is extremely low, which
made the stain much difficult to attach. Thus, a small amount of
dirt can be removed by rinsing with rain water, which can achieve
self-cleaning effect. Which save the owner a lot of cleaning and
maintenance costs each year.
Identification Method of Nano aluminum composite panel
The simplest identification method of nano aluminum composite
material is to apply oil-based pen to the surface. If there is no
trace after wiping then must be nano acp panels, the scratches of
ordinary aluminum composite panel are difficult to erase.
| Nano aluminum composite panel characteristics |
Project
|
nano fluorocarbon coating
|
fluorocarbon coating
|
| Structural | The nano material resin is used, and the particle size is between
about 0.03 μ and 0.01 μ, which is smooth and delicate | The surface coating particle size is finer than 0.0μ and the
surface is smooth |
| Stain resistance | The surface is fine and smooth, and air dust and oil are difficult
to adhere and easy to clean. | The dust particle size is similar to the coating particle size and
is easy to adhere. |
| Self-cleaning | The surface particles are small, the surface tension is large, and
the dust particles are easily taken away by the wind and water. | The surface tension is small, the adhesion of dust and oil is
large, and the water droplets move in a sliding manner, which is
difficult to carry away from dust particles. |
Scrubbing resistance
|
Wipe more than 10,000 times
|
Wipe it thousands of times
|
| Weather resistance | Adopting the international leading “three-coat” technology, it has
higher weather resistance and color protection layer. Nano-coating
forms a protective film on the surface of the coating to prevent
oxidation and aging of the coating. Warranty for 20 years. | It adopts the traditional general “two-coat” technology and is
guaranteed for 15 years. |
Panel thickness: 3-6mm, recommended 4mm.
Board width: 1000-1575mm, recommended 1220mm, 1250mm, 1500mm.
Board length: up to 5800mm, recommended 2440mm, 3050mm, 4050mm
Material selection
Aluminum panel substrate: high strength aluminum alloy coil
Core material: non-toxic low density polyethylene
Surface coating: fluorocarbon nano-coating
The principle of nano acm panels:
A self-cleaning protective layer is sprayed on the surface of the
fluorocarbon coating, which can be separated from contaminants such
as ash layer and decompose organic pollutants in the atmosphere to
achieve self-cleaning effect.
