AF-200mm Single Screw PP Sheet Extrusion Machine , Thermoforming
Sheet Extrusion Machine
processing raw material: PP,PS
max sheet width (after trimming) : 200mm,
sheet thickness range: 0.1-2mm,;
application: it's widely used in photography display optial system
,optical communication industries
Machine specifications:
Ⅱ. Technical parameter:
| S.N | Description | Qty |
| 1 | AFSJ-45 Single- screw extruder Gearbox: The body of the gearbox is made from cast steel. The teeth deal
with grinding and peeling eventually, which provides damping,
antifriction, low-noise, long using period etc. characteristics. The screw: Screw diameter: 45mm L/D: 28: 1 Screw structure: special Material: high quality nitrided steel-38CrMoAIA Nitration depth: 0.3-0.6mm, hardness≧ 740HV,fragility is 2 grades. The Barrel: Material: high quality nitrided steel-38CrMoAIA Nitration depth: 0.4-0.7mm, hardness≧ 940HV,fragility is 2 grades. Heating zones: 6 zones The electric heaters are made of cast aluminum. Each electric
heater has a specially designed tunnel for heat radiation. The fans are featured with imported low lose and high
effectiveness. The whole temperature control system is of Japanese RKC. Main motor: Power: 22KW A.C motor (DONGGUAN MOTOR)
| 1 set |
| |
| 2 | Auto hydraulic screen changer Its special internal structure provides a excellent seal effect The parts of Screen changer consisted the mould are made of alloy
steel, which experienced heat treatment strictly. Control style: complete hydraulic pressure
| 1 set |
| |
| 3 | T-die Effective width: 400mm Material: adopt Japanese advanced heat proof alloy steel The flows are plated chrome. And the flow surface is polished until
it like mirror. The outlets of the mould can be adjusted with the adjustable screws
slightly. There are 5 heating zones in the mould. Heating power in every
zone: 3kw The heat means: heating inside by bar heaters
| 1 set |
| |
| 4 | Calender roll stack Structure: inclined style Roll number: 3 Diameter of roll: 395/395/395mm Roll length: 450mm Wall thickness of the roll: ≧25mm Roll surface treatment: treatment of mirror polishing The roll adopt Japanese alloy steel, and with hard chrome
treatment, the hardness can reach RC60-65 Structure of the rolls is of multi layer compound style water
exchange system, which provide good thermostat. Media: water Tolerance: ±1℃ The thermostat system controls temperature of the three rolls
separately. The temperature of the three rolls can be adjusted
individually. The three rollers system is of individual control mould Transmission system: Power: 4kw×3=12kw One emergency stop system: one Precise adjusting system for the clearance between the three rolls. Hydraulic pressure system for Clamping and open-close
| 1 set |
| |
| 5 | Air cooling stand Number of the transmission rollers: 8 Roller length: 400mm Roller surface treatment: plated chrome and half-mirror polishing
| 1 set |
| |
| 6 | Corona treatment Double sides treatment
| 1 set |
| |
| 7 | Trimming unit Slitting by disc blade
| 1 set |
| |
| 8 | Haul off unit Haul off steel roller: one Diameter of the roller: 240mm Length of the roller: 400mm Surface treatment: plated chrome and half-mirror polishing Haul off rubber roller: one Diameter of the roller: 240mm Length of the roller:400mm Surface treatment: coated erosion resistance, heat resistance and
friction resistance rubber and polished. Clamping and open-close means: pneumatic Equipped with a 1.5kw inverter control
| 1 set |
| |
| 9 | Two- shaft winder Winding size: 200mm Control power: 1.5kw*2 Working position: 2
| 1 set |
| | |
| 10 | Cutting machine Machine width: 200mm Cutting machine power: 0.75kw Discharge method: belt conveyor The reducer and motor adopt China famous brand
| 1 set |
| | |
Packaging and shipping
| PACKAGING | plastic film + stretch film + wooden case + drying agent. |
| DELIVERY | About 120 days (all new parts) |
| SHIPPING | We place and fix the machines well into container and check
carefully before closing the container so as to ensure everything
is ok for the shipment. (Use steel wire to fix machine and drying
agent).
We care each and every point so that our clients could receive the
machines in perfect situation. |
What is our service system?
| PRE-SALE | a. Detailed machine introduction;
b. Suggest suitable turnkey solution as per clients requirements;
c. Provide test production for reference; |
| IN PRODUCTION | a. Supply layout drawing to clients for preparation;
b. Suggest suitable building project for pipelines, electric
wiring, air pipes, cooling cycle water etc;
c. Keep the clients be informed of the production status; |
| AFTER SALE | a. Send engineers to overseas for installation ,commissioning and
training;
b. Supply extruding products' material formula, recommend excellent
supplier of the raw material per clients' requests;
c. Offer help if any need from clients like spare parts need etc;
d. Supply necessary technical support at request; |
Why choose YAOAN MACHINERY?
1. Profession: YAOAN only make plastic extruder since 1980s,
extensive experience and professional team ensure our leading
position in plastic extruder industry.
2. Quality: The quality of products is footstone of enterprise's
constant development, always endeavoring to do still better,
quality comes first, developing & innovative is our
responsibilities;
3. Delivery: We optimize factory management, and improve production
flow so as to shorten production period for you in biggest extent;
4. Cost control: We do best to lower down production cost by our
inner management improvement, so as to ensure that our products are
competitive enough in market, and to realize higher
performance-price ratio of our products.
FAQ
Q1: What is the guarantee of the machine?
A1: The guarantee period of our machine is 12 months after the
machine is installed well in buyer's factory;
Q2: What package do you use for the machine?
A2: Painted the machine with anti-corrosion oil, and then covered
with plastic film, and then packed into wooden case or fixed onto
wooden pallet as per clients' requirements, or shall be loaded into
container with film packing. After fixed all machines, we will use
drying agent to keep container inside dry.
Q3: Do you have instruction manual to guide us if i buy the
machine?
A3: Yes, we supply detailed user manual for your reference. PLS
read it carefully for guide. If there is still problem which could
not be solved, PLS contact us, we are ready to help you anytime.
Q4: What is your service to overseas clients?
A4: We supply perfect overseas service. We shall send engineers to
overseas for machine installation and commissioning and test
production guide, and also training to the workers of the buyer.
And we are ready to give technical support anytime.
