Small volume, polypropylene film capacitor CBB22 250J100V P15mm
L4mm
Features:
1. Excellent self-healing ability
2. Excellent temperature characteristic ability
3. Excellent flame resistance ability
4. Lower DF value and high insulation resistance
5. Low loss at high frequency
6. Small inherent temperature rise
7. Flame retardant epoxy resin powder coating (UL94/V-0)
▇ Specifications
| Climatic Category | 40/105/21 |
| Operating Temperation Range | -40 ℃ ～ 105℃ ( +85℃ to +105℃; decreasing factor 1.25% per ℃ for vR (dc)) |
| Ratde Voltage | DC 100V ,250V,400V,630V |
| Capacitance Range | 0.01µF～10 µF |
| Capacitance Tolerance | ±5% (J), ±10%(k) |
| Voltage Proot | 1.6UR (5s) |
| Dissipation Factor | ≤10x10-4 (1kHz, 20℃) |
| Insulation Resistance | ≥50000MΩ , CR≤0.33 µF ≥15000s, CR>0.33 µF (20℃ 100V 1min) |
① W: capacitor body width
② H: Capacitance height ③ T :Capacitance thickness ④ P:he distance between two CP lines ⑤ d: Diameter of CP line |  |
▇ Typical Applications
● Widely used in high frequency,DC ,AC and pulse circuits
● Providing optimun performance with small size in S-correction
circuits for colour TV
● Specially designed for S-correction circuits of large screen
monitor and colour TV
● Suitable for the situation where applies high frequency and high
current pulse
Company Information
Our factory is an expert manufacturer of Film Capacitor which
provides DC capacitors and AC capacitors. So far, our products have
obtained UL, ENEC, CB, CQC, safety approval and company
certification by ISO-9001:2008 quality assured firm.
We use efficient automatic equipment which ensures maximum
consistency in your OEM orders to produce each capacitor. With 12
years of industrial experience, Don't hesitate to contact us
If you have any question, we always supply competitive price and
good quality products.
Description of Film Capacitor
Film capacitors, plastic film capacitors, film dielectric
capacitors or polymer film capacitors, commonly known as film
capacitors, power film capacitors, are electrical capacitors with
insulating plastic film as the dielectric, sometimes carper des ro
combined with ro
Depending on the required dielectric strength, the dielectric film
is stretched to extremely thin thicknesses in a special process and
then equipped with electrodes. The electrodes of film capacitors
can be metallized aluminum or zinc coated directly on the surface
of the plastic film, or a separate metal foil. Two of these
conductive layers are wound into cylindrical windings, usually
flattened to reduce mounting space requirements on printed circuit
boards, or layered as multiple single layers stacked together to
form the capacitor film capacitor body. , along with ceramic
capacitors and electrolytic capacitors, are the most commonly used
capacitor types in electronic equipment and are used in many AC and
DC microelectronics and electronic circuits.
