HAF-100-BF is special designing for rotation molding products PU
filling process,
we success exported to many countrys, for cooller PU filling
process,
The main technical characteristics of the equipment are as follows:★ The foaming machine is compatible with F11, 141B, 245fa and full
water foaming systems;★ The POLY and ISO material pressure needle valve is locked after
balance to ensure thatthere is no pressure difference between POLY and ISO material;★ Magnetic coupling adopts high-tech permanent magnetic control, no
temperature rise,no leakage.★ Automatic timing clean the mixing head after injection;★ 16 work stations production can be adopted, which can satisfy the
production of multipleproducts. Mixing head using double (more) proximity switch control
can achieve accurateinjection;★ Frequency converter soft start and high and low frequency
automatic switching, lowCarbon energy saving and environmental protection, energy
consumption greatlyreduced;★ Full digital, modular integrated control of all processes,
accurate, safe, intuitive,intelligent, humanized;★ The synchronous measuring material ratio of the mixing head feed
line is more accurateThan that of the system loop measuring and the single component
measuring of themixing head;★The complete closed-loop pouring of the equipment, automatic
identification andAdjustment of the filling material at each station, feeding
material, robot pouring,automatic control and rolling bubble are completed in one process.Main Technical Parameters of HAF100-BF High Pressure PU Foaming
machine| NO. | Project | Technical Parameters
|
| 1 | Applicable foam type | Rigid Foam |
| 2 | Applicable raw material
viscosity(22ºC) | POLY : 2500MPas
ISO : 1000MPas |
| 3 | Injection pressure | 10~20Mpa(Adjustable) |
| 4 | Injection flow(Mix ratio 1:1) | 150g~1500g/s |
| 5 | Mixing ratio range | POLY1 : ISO1 = 1:5 ~ 5:1 (Adjustable) |
| 6 | Injection time setting | 0.1~99.99s (Accurate to 1s) |
| 7 | Material temperature control error | ±2ºC |
| 8 | Inject procedure recipe | 16 pcs |
| 9 | Reinjection accuracy | ±1% |
| 10 | Mixing head | YZL1218-2k 1set |
| 11 | Hydraulic system | Flow ~10L/min
system pressure 10~25MPa |
| 12 | Tank volume | 260L |
| 13 | High voltage setup time | 0.7s |
| 14 | Interval time of injection | ≥0.7s |
| 15 | Compressed air requirement
| Dry and oil-free P:0.7Mpa
Q:600NL/min |
| 16 | Nitrogen requirement
| P:0.7Mpa
Q:600NL/min |
| 17 | Temperature control system | Heating power of chiller and water heater: 2 x 2KW
Cooling: 15000Kcal/h (refrigeration capacity) |
| 18 | Input power | Three-phase five-wire, 380V, error 10%,power: 38KW |
19
| Machine size(mm)
(length×width×height) | 3900×1400×2900 |
| 20 | Design of inject Method | manual injection foaming |
this is very stable machine, all the cable and tube are be marked
with reference number
our customer can buy this machine and install independing very
easier,
If you are planing to purchas one PU foaming machine for your
rotomolding product,
we are with confidence to recommand you consinder this machine
Our experience told us, This machine is really less problem and
trustable quality,
Please contact us for the machine offer .
