Induction heating machine power supply high frequency electric
magnetic 5kw 10kw 40kw
CR1300 series is mainly used in all kinds of plastic machinery
(such as: injection molding machine, extruder, granulator,
film blowing machine, wire drawing machine energy-saving
transformation), chemical fiber equipment, food and medicine
machinery, steam and hot air preparation and other industries.
Main functions Induction heating machine power supply high frequency electric
magnetic 5kw 10kw 40kw
1. Start mode is optional
Remote boot (external terminal boot and 24V pulse boot), keyboard
boot.
2. Perfect protection function
Overheat, overvoltage, undervoltage,lack of phase,overcurrent
(including hardware overcurrent protection, software
overcurrent protection, VCE protection) and other protection, and
temperature sensor fault detection function
3. Load inductance detection function
Can measure the size of the load inductance,when the inductance is
too large or too small, alarm and start the corresponding
protection function.
4. Various heating modes
Maximum power heating, curve heating, twenty section heating,analog
amount (0 ~ 10V /4 ~ 20mA) control heating and other heating mode
5. Run limited function
The limited run time can be set as required
6. Parameter storage function
Instant storage of fault information; Power consumption,
accumulated running time and so on are stored every 2 hours
7. External fault signal input and local fault signal output.
Application environment Induction heating machine power supply high frequency electric
magnetic 5kw 10kw 40kw
| Working temperature | -20℃~+40℃ |
| Relative humidity | Less than 90%RH, no condensation |
| Altitude | Less than 1000m (when higher than 1000m, the power shall be reduced
by 15% for each 1000m rise) |
| Storage temperature | -30℃~+60℃ |
| others | 1.Please install in the place where it is impossible to be subjected
to intense vibration and impact; 2.Please install it away from electromagnetic radiation sources. 3.Please install in the place without dust pollution and explosion
risk; 4.Do not install in direct sunlight, oil mist, steam, salt
environment. |
Features Induction heating machine power supply high frequency electric
magnetic 5kw 10kw 40kw:
| Overload protection | 120% per minute 150% instant protection |
| startup time | < 0.2S |
| Electro-thermal conversion | > 95% |
| Effective power | > 85% |
| The service life | > 50000Hrs |
| Protection detection | < 10μS |
| Others | This product should not be used to endanger personal safety or
other occasions with special safety requirements
|
Specification Induction heating machine power supply high frequency electric
magnetic 5kw 10kw 40kw
| Model | Input | Output | Load inductance range(uH) |
| Voltage range and frequency | Power | Current | Minimum line diameter(mm²) | frequency |
| CR1300-005D-24TF | 3 pahse 400V (±20%) 50HZ/60HZ | 5KW | 6-9A | 6 | 8~35KHZ | 60-200 |
| CR1300-005A-24TF | 5KW | 6-9A | 6 |
| CR1300-008A-24TF | 8KW | 10-14A | 10 |
| CR1300-010A-24TF | 10KW | 12-18A | 10 |
| CR1300-015A-14TF | 15KW | 18-27A | 10 | 8~25KHZ | 80-135 |
| CR1300-020A-14TF | 20KW | 24-36A | 16 |
| CR1300-025A-14TF | 25KW | 30-45A | 16 | 80-160 |
| CR1300-030A-14TF | 30KW | 36-54A | 16 |
| CR1300-035A-14TF | 35KW | 42-63A | 25 | 60-160 |
| CR1300-040A-14TF | 40KW | 48-72A | 25 |
| CR1300-050A-14TF | 50KW | 60-90A | 35 |
| CR1300-060A-14TF | 60KW | 72-108A | 35 | 60-135 |
| CR1300-080A-14TF | 80KW | 96-144A | 50 |
| CR1300-100A-14TF | 100KW | 120-180A | 75 |
Application Cases
Packaging:
1. Plywood or wooden case
2. Adhesive wrap to prevent scratches
3. Plastic film to keep the machine together
4. Foam plate and block to prevent shake
5. Other customer's requirements
Our Services
1. keep the quality first and make more products benefit to our
customers' need
2.about our Online/Sale service
1)super and solid quality
2)Fast and punctual delivery
3)Standard export package or as customers’ need.
3.After-sale service
1)Assistance to your project
2)Repairing and maintenance if any problem occur in the warranty.
3)Installation and clerks training
4)Spare and wearing parts for free or with big discount
5)Any feedback of machines can be told to us, and we will try our
best to support you.
4.Other cooperation service
1)Technology knowledge share
2)Factory building advising
3)Business expansion advising
Shipping ways
1. Fedex/DHL/UPS/TNT for samples, door to door;
2. By air or by sea for batch goods for FCL, airport/port receving;
3. Customers specifying freight forwarders for negotiable shipping
nethods.
4. Delivery time: 3~7 days for samples, 10~25days for bulk order
goods.
FAQ:
1. Are you a trading company or manufacturer?
We are manufacturer located in Shenzhen, China, specialized in
induction heating power for many years.
2. What's the delivery time for sample and bulk order?
Normally we have stock of the mini and medium items, 1-3 days for
sample order, 15-40days for 20 GP and 40HQ quantity.
3. What's your quality guarantee period?
12 months warranty
4. I am not so familiar with your machine now. I am not sure i can
use it well if i buy it from you?
Dont worry about this any more. With the machine,we will send you a
brochure with detail information with
our machine operation. If you need, Video is also available.
Inductors are important part of induction heater, it is precisely
designed, manufactured
by good quality material, and tested many times before outgoing, it
is detachable, and can be customized accoridng to your workpiece:
