Automobile Wheel Hub Cationic Electrophoretic Coating
Product Introduction
HLS-1701ALB/HLS-1701A Black Cationic Epoxy Electrocoat for auto is
a new generation electrophoretic coating researched and developed
by HLS Paint (Shanghai) Co., Ltd.
It represents modern technology of cathodic electrophoretic coating
that is environment-friendly with high property and low cost. Such
coating does not contain heavy metal like lead, tin, cadmium and
mercury etc. It is a two-component, water-dispersed
resin,meanwhile, it took in features of previous products, and can
adapt galvanized steel sheet perfectly, almost can be applied to
foundation coating of all metal, such as: cold and hot rolled steel
sheet, galvanized steel sheet, aluminum products and stainless
steel sheet etc.
This product features shown below:
Strong anti-corrosion properties, good salt spray resistance
workpiece edge.
|
| Have excellent corrosion resistance and weathering resistance,
especially suitable for the bottom surface of a painting； |
Good stability of bath can adaptable for a longer updating cycle. |
Main ingredients
| Neutralizing agent :organic acid |
Solvent::alcohol ether |
Pigmen:Titanium pigment, carbon black, kaolin, antirust pigment |
Filling tank proportion and method
⑴ Ripening conditions
Sample quantity: 3000～5000g
Container: 4L (Diameter 16cm)
Tank temperature: 28-30 ℃
Time: 24～48Hr
Mixed conditions: impeller diameter 8cm (speed 200rpm)
Storage, packaging and transportation :
This product is a water-borne industrial coatings, non-hazardous,
non-inflammable and explosive products; transportation to prevent
direct sunlight, avoid freezing (>5℃ ); Packaging for 50/60/200L
Plastic barrel; in the transport and storage of drums should be
maintained clean, avoid charging the dirt brought in on drums
during filling tank, again checked and confirmed that the quality
of products, including paste resin, emulsions and additives should
be indoor storage, good ventilation, dry, protect against freezing
and overheating, the storage temperature should be controlled at
5～35℃, products from the date of production, over shelf,
experimentation is required to determine whether can continue to
use.
Customer production site:
Advantage:
(1). Green environmental protection, no heavy metals, no waste
discharge.
(2). Less investment, low cost
(3). Operation safety, not any harm to the spray plating personnel.
(4). Suitable for automated production, automated production line
can be based on customer demand.
(5). Colorful, gold, silver, bronze, antique gold, yellow, red,
blue, purple, etc.
(6). Recycling, spray plastic products can be smashed after the
waste, then recycle.
(7). Wide range of application, all kinds of materials can be
sprayed coating, no volume limit.
(8). A cross color can be Partial spray, the same product can be
sprayed with different colors and effect pattern.
(9). Nanometer coating with less investment, green environmental
protection. Color, material, size is not limited
