continuous conveyor mesh belt dryer
Higao Tech fabricate professional continuous conveyor mesh belt dryer machine for drying fruits and vegetables in china. Belt dryer machine is a
low temperature drying equipment to keep the shape and color for
the materials.
1. Introduction and Application:
Continuous conveyor mesh belt dryer machine is a continuous working
drying equipment. Belt dryer is used for drying pieced materials,
sliced materials, strips, and granular materials with good
ventilation.
Especially suitable for the materials which have high water content
and works without high temperature, such as dehydrated vegetables,
herbal medicines of traditional Chinese medicines, etc.
Can also dry paste material of de-watering filtering cakes after
being made into granules or slices.
Widely used in pharmacy, chemical, food stuff, plastic products,
gum, electron, de-watering vegetable, additive, gourmet powder,
shredded coconut stuffing, organic color, compound rubber, acryl
fiber, medicine, medical material, small wooden product, aging and
solidification of the electronic components.
2. Working Principle:
The belt is sized at 12-60 mesh, made of stainless steel wire
screen. The materials are put on the belt by the feeder, and
continuously moves from one side to the other side inside the direr
by a transmitting device.
Composed of several units with separate circulating hot air. Some
exhausted air is discharged from a special moisture-discharging
blower. The waste air is controlled by a valve. The hot air passes
through the belt from the top to the bottom or from the bottom to
the top to complete the process of transferring and exchanging heat
and mass, and takes out the moisture inside the raw materials. The
circulation units can be freely equipped according to customers
demand.
3. Features:
(1) The speed of the belt can be freely adjusted as per the heating
temperature of the materials.
(2) The number of drying units can be customized according to
request.
(3) Air pressure and air amount can be adjusted.
(4) Drying temperature and drying area can be controlled.
(5) We can add necessary auxiliary equipment and use different
process to meet different characteristics of raw materials.
