16ir 14w Carbide Threading Insert Cemented Tungsten Cnc Cutting Tools Steel Fast Feed

Quick Detail:

• Good wear resistance
• Sharp blade
• Low friction coefficient
• Oxidation resistance
• thermal shock

Description:

• The carbide matrix with very fine particles perfectly combines the wear resistance of the tool with the cutting edge strength; The carbide threading insert is covered with high-quality coating to enhance the wear resistance and the lubrication of the tool body, ensure the service life of the tool and improve the working efficiency; Sharp and wear-resistant blade, smooth cutting, greatly improving processing efficiency; The unique chip removal groove design ensures smooth chip removal during machining, effectively prevents the generation of chip buildup, and makes better use of tool wear resistance and cutting edge.

Specifications:​

Lead Time:

Notice:

• The carbide threading insert shall not be collided or dropped on the ground and must be handled with care.
• Before installing the carbide threading insert , the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
• After installation, it is necessary to confirm whether the central hole of the carbide threading insert is firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
• When using, do not exceed the specified high speed
• When the carbide lathe insert is not used, hang the blade vertically on the dry shelf.

Applications:

Our carbide lathe insert could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following: