accurl machine price hydraulic single stage horizontal electric
manual pad ct12 press brake ES6020
| No. | Name | Specification | Measure Unit |
| 1 | A (Length) | 2700 | mm |
| 2 | B (Width) | 1360 | mm |
| 3 | C (Height) | 2590 | mm |
| 4 | D (Installation width) | 2200 | mm |
| 5 | E (Throat depth) | 355 | mm |
| 6 | F (Open height) | 420 | mm |
| 7 | G (Distance between lower and upper table) | 300 | mm |
| 8 | H (Upper worktable height) | 940 | mm |
| 9 | I (Frame distance) | 2000 | mm |
| 10 | K (Controller height) | 1000 | mm |
| 11 | Capacity | 60 | ton |
| 12 | Bending length | 2000 | mm |
| 13 | Stroke | 150 | mm |
| 14 | Back gauge stroke | 500 | mm |
| 15 | Total power | 31.5 | kw |
| 16 | Total weight | 5.4 | ton |
| 17 | Number of axis | 6 | axis |
| 18 | Accuracy of axis D1/D2 | ±0.005 | mm |
| 19 | Accuracy of axis L | ±0.01 | mm |
| 20 | Accuracy of axis Z | ±0.1 | mm |
| 21 | Accuracy of axis Y1/Y2 | ±0.1 | mm |
| 22 | Approach speed of axis D1/D2 | 200 | mm/s |
| 23 | Bending speed of axis D1/ D2 | 0.2-50 | mm/s |
| 24 | Return speed of axis D1/ D2 | 200 | mm/s |
| 25 | Moving speed of axis L | 500 | mm/s |
| 26 | Moving speed of axis Z | 62 | mm/s |
| 27 | Moving speed of axis Y1/Y2 | 700 | mm/s |
Key Components Configuration List
| No. | Name | Set | Manufacture |
| 1 | CNC Controller(STEP 3D) | 1 | STEP(Italy) |
| 2 | Foot switch | 1 | KACON(Korea) |
| 3 | Terminal module | 3 | DIAMANTE(Taiwan) |
| 4 | Circuit breaker | 1 | SCHNEIDER(Germany) |
| 5 | Circuit breaker Switch | 1 | SCHNEIDER(Germany) |
| 6 | AC contactor | 3 | SCHNEIDER(Germany) |
| 7 | Relay | 1 | SCHNEIDER(Germany) |
| 8 | Relay socket | 1 | SCHNEIDER(Germany) |
| 9 | Power supply | 1 | DELTA(Taiwan) |
| 10 | Motor driver + Servo motor (D axis) | 2 | SANYO(Japan) |
| 11 | Motor driver + Servo motor (Back gauge) | 4 | MITSUBISHI(Japan) |
| 12 | Sensor | 11 | OMRON(Japan) |
| 13 | Ball screw(D axis) | 2 | IF(Germany) |
| 14 | Screw + Rail(back gauge) | 6 | HIWIN(Taiwan) |
| 15 | Bearing | 15 | NSK(Japan) |
| 16 | Timing belt | 2 | OPTIBELT(Germany) |
| 17 | Frame + Upper table (Q345E Steel) | 1 | (China) |
Main structure and working principle
The machine is a 6-axis (D1, D2, Y1, Y2, Z and L) full-servo press
brake, dispense with hydraulic oil, free from the influence of oil
temperature variation on the workpiece, and the machine tool is
more precise, energysaving and efficient than the oil press. It is
mainly composed of the following components:
l Frame body
The component comprises a frame, the upper and lower table,
transmission screw rod, support bearing group, guide wheel group,
etc. The transmission screw rod is connected with the upper table
and the frame through bolts, the servo motor drives the screw rod
to rotate upper table rapidly with reciprocating motion, for the
purpose of bending and forming moulds. The two groups of
transmission screw rods can be independently controlled, and the
angle deviation, if any, can be automatically compensated, so that
the angle change of the workpiece is controlled within the
tolerance range.
l Back gauge system
The assembly unit comprises lifting component, sliding table
component, material retaining component, etc. The positioning
system of back gauge of the machine tool is all driven by a servo
motor through precision screw rod, can quickly reach the specified
position, up to micron-level precision, finally realize full
automation and improve the working efficiency.
l Mould components
The assembly unit consists of the upper and lower mould assembly.
The upper mould is fixed on the upper table by the clamping device;
the clamping device provided by the device realizes quick loading
and unloading of moulds through a mechanism. The clamping device is
provided with a wedge trimming mechanism for locally modifying the
bending angle so that the angle of workpiece is changed within the
tolerance range. The lower mould, together with the mould sea and
rail guide, is arranged on the lower table.
CNC Controller
STEP Controller please reference by the document of STEP_English.
Hoisting and installation
(1)Hoisting
The center of gravity of the machine is slightly forward and on the
high side, so it is necessary to pay attention to the position of
center of gravity of the machine tool during lifting, handling and
installation so as to avoid overturning of machine tool. During
hoisting, the lifting appliance must be fixed on the hoisting hole
of machine tool for vertical hoisting. For transportation, the
equipment must be firmly fixed with a bandage.
(2)Installation and leveling
As indicated in the attached drawing (foundation drawing), make the
machine tool installation base in advance, put the machine tool on
the base, and install the foundation bolts and foot-pad steel
plate. Meanwhile, confirm the level of the rack, with the lower
table surface as the baseline. Adjust the bolts of base anchor to
make the levelness in the vertical and horizontal
direction≤1000:0.20. To adjust the levelness of machine tool in
both vertical and horizontal direction to reach the requirement.
(3)Requirements for external connection cable
For the safety of machine and operators, a 100A three-phase air
circuit breaker must be installed 2 for externally connected power
supply, and the cable is required to be 4-core RV wire ≥10mm . In
addition, the grounding device needs to be set independently and
cannot be shared with other electrical circuits, with resistance
value ≤ 4 Ω.
Maintenance
Specifications on daily maintenance of full-server plate bending
machine
In order to ensure good performance and precision of equipment
during production, guarantee product quality, reduce maintenance
frequency and prolong the service life, it is required to strictly
carry out daily inspection items, e.g., dust and rust removal,
moisture prevention, lubrication, screw tightening, etc.
EKO Equipment Co.,Ltd. is a high-tech and environment-friendly
sheet metal CNC press brake manufacturer. The product technology
comes from the "blood" of the international industry.
EKO has four series of high-quality press brake: "ES", "EHII", "ET"
and "ESS". There are strong technological strength, innovative
equipment development concepts, the professional development team,
self-core technology and numbers of new technological innovation
patents. The market covers all over the world.
EKO pays attention to the construction of enterprise culture,
builds enterprise culture brand, and integrates enterprise culture
into products. EKO adhere to the principle of "continuous
improvement and continuous innovation" to build a self-contained
system. Adheres to the quality policy of "customer satisfaction is
our pursuit, quality assurance is our commitment", which is guided
by customer needs and based on high-quality products to ensure
product quality. Continue to provide customers with high-precision,
high-efficiency, safety, stable, energy-saving,
environmentally-friendly sheet metal processing machine.EKO
Equipment Co.,Ltd. is a high-tech and environment-friendly sheet
metal CNC press brake manufacturer. The product technology comes
from the "blood" of the international industry.
EKO has four series of high-quality press brake: "ES", "EHII", "ET"
and "ESS". There are strong technological strength, innovative
equipment development concepts, the professional development team,
self-core technology and numbers of new technological innovation
patents. The market covers all over the world.
EKO pays attention to the construction of enterprise culture,
builds enterprise culture brand, and integrates enterprise culture
into products. EKO adhere to the principle of "continuous
improvement and continuous innovation" to build a self-contained
system.
Adheres to the quality policy of "customer satisfaction is our
pursuit, quality assurance is our commitment", which is guided by
customer needs and based on high-quality products to ensure product
quality. Continue to provide customers with high-precision,
high-efficiency, safety, stable, energy-saving,
environmentally-friendly sheet metal processing machine.
FAQ:
Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of
Analysis /Conformance; Insurance; Origin, and other export
documents where required.
What kind of payment do you accept?
Generally, we accept T/T and L/C payment, 30% deposit and 70%
payment before delivery. If you are our special customer, we can
accept better payment method.
What is the warranty period of your machine?
For conventional machines, our warranty period is one year. For
special non-standard machines, we may provide a 2-3 year warranty,
but this should be confirmed with our sales team in advance. During
the warranty period, we provide free replacement parts.
Do you accept OEM customization?
Yes, we accept OEM customization, such as customized machine
appearance, color, configuration, etc. Of course, the price of
customized products sho
