NiAl95/5 Thermal Spray Wire NiAl alloy solid wire 1.6mm /2mm in
stock High Performance With ISO / CE
PRODUCT OVERVIEW
NiAl95/5 is a solid wire specifically designed for arc spray
systems. It is self-bonding to most materials and requires minimal
surface preparation. Bond strengths in excess of 9000 psi can be
achieved on clean smooth surfaces. Roughening of the surface by
machining, grit blasting or grinding can increase the bond strength
up to 10,000 psi. NiAl95/5 exhibits good resistance to high
temperature oxidation and abrasion, and excellent resistance to
impact and bending. NiAl95/5 can be machined and ground to a finish
of 5 micro inches. It is a self-bonding, one step material and is
also suitable for the build-up and dimensional restoration of
nickel-based alloys. PMET 885 is widely used as a bond coat for
subsequent thermal spray topcoats and as a one-step build up
material for dimensional restoration of aircraft engines.
TYPICAL DEPOSIT CHARACTERISTICS:
Þ Typical Hardness: HRB 75
Þ Bond Strength: 10000 psi
Þ Deposit Rate: 10 lbs/hr/100A
Þ Deposit Efficiency 70%
Þ Wire Coverage: 0.9 oz/ft2 / mil
Þ Surface Texture * Variable
Þ Machinability Good
Þ Coefficient of Thermal Exp. 7x10-6 in/in°F
(1000°F)
* Depends on air pressure used
SURFACE PREPARATION
Surface should be clean, white metal, with no oxides (rust), dirt,
grease, or oil on the surface to be coated. Note: It is best not to
handle surfaces after cleaning.
Recommended method of preparation is to grit blast with 24 mesh
aluminum oxide, rough grind, or rough machine in a lathe.
APPLICATION
Þ Bond coat
Þ Dimensional restoration
SPECIFICATION
95Ni 5Al, PWA 36937 for PWA 271-37 Rev H,
GEAE C07-042 for GE SPM 70-49-38,
B50TF56-S11/CL A (Chem only), CFMI CP6039 for 70-48-14,
Honeywell FP5045, Type XV Nickel Aluminum
NOMINAL CHEMICAL COMPOSITION (wt%)
| Ni | Al | Total Others |
| 93.0 | 4.0-5.5 | 1.7 Max |
RECOMMENDED SPRAY PARAMETERS:
| Diameter | Air Pressure | Voltage | Amperage | Standoff |
| 1/16” (1.6mm) | *50-60 psi | *29-30 | *100-200 | *3-6 in (8-15 cm) |
* Parameters are Typical and may vary depending on equipment used.
Contact your equipment manufacturer for optimum spray parameters
STANDARD SIZES & PACKAGING:
| Diameter | Packaging |
| 1/16” (1.6mm) | 15kg/spool |
FAQ
1. What's the minimum quantity customer can order?
If we have your size in stock, we can provide any quantity you
want.
If we do not have, for spool wire, we can produce 1 spool, about
2-3kg. For coil wire, 25kg.
2. How can you pay for small sample amount?
We have account, wire transfer for sample amount also ok.
3. Customer do not have express account. How will us arrange the
delivery for sample order?
Just need to provide your address information, we will check the
express cost, you can arrange the express cost together with sample
value.
4. What's our payment terms?
We can accept LC T/T payment terms, it also depending on delivery
and total amount. Let's talk more in details after getting your
detailed requirements.
5. Do you provide free samples?
If you want several meters and we have stock of your size, we can
provide, customer need to bear the International express cost.
6. What's our working time?
We will give you reply through email/phone Online contact tool
within 24 hours. No matter working day or holidays.
