The EN 1092-1 Equivalent ASME is one of most common flanging used
in the world. The EN 1092-1 Flange is used in industries like those
of oil, gas & mining. Increasingly European rated EN 1092-1 Type 11
PN10 Flange is also specified in standards such as the BS4504 as
well as AS4331 apart from the EN 1092-1. And EN 1092-1 Type 11
titanium weld neck flange is also one of our superior products.
Advantages of Titanium Flange EN1092-1
Our moulds for flange are very complete, so we can produce flanges
in all standards, including EN1092-1, ASME B16.5, DIN and BS etc.
Long service life
Corrosion-resistant
High yeiled strength and tensile strength
Excellent strength to weight ratio
High temperature resistance
Low temperature resistance
Good thermal conductivity
Great malleability and weldability
Different Titanium Grade
| grade | Tensile strength(min) | Yeild strength(min) | Elongation(%) | | | |
| component | ksi | MPa | ksi | MPa | | |
| Gr1 | Ta1 | 35 | 240 | 20 | 138 | 24 |
| Gr2 | Ta2 | 50 | 345 | 40 | 275 | 20 |
| Gr5 | Ti6Al4V | 130 | 895 | 120 | 828 | 10 |
| Gr7 | Ti-0.2Pd | 50 | 345 | 40 | 275 | 20 |
| Gr9 | Ti-3Al-2.5V | 90 | 620 | 70 | 483 | 15 |
| Gr12 | Ti-0.3Mo-0.8Ni | 70 | 483 | 50 | 345 | 18 |
Detailed images
Our Factory
Application of Titanium Flange EN1092-1
Refineries
Gas Processing
Off-Shore Oil Drilling Companies
Petrochemicals
Paper & Pulp Companies
Power Generation
Specialty Chemicals
Pharmaceuticals
Water Pipe Line
General Piping
Construction
Engineering
Food Processing & Dairy
boiler & heatexchangers
Stock
Quality Inspection
Packaging
