Performance
Stiffness (Kv or Ks):
Wire rope isolators exhibit non-linear stiffness behavior. Small
deflections, usually associated with vibration isolation, will have
a different spring rate than larger shock deflections. We publishes
typical vibration stiffness values (Kv), and average shock
stiffness values (Ks) within the catalog. These values can be used
with the provided equations listed on Page 6 to predict system
performance. The stiffness values listed in the catalog are for
full-loop versions. For reduced loop versions, ratio the stiffness
by dividing the number of desired loops by the number of full
loops.
Wire rope is nonlinear vibration isolator's stiffness. Shape
variable under the condition ofsmall and large, the vast
differences in the stiffness hardness.
The user can according to the parameters of the product has been
tested in the manual and we deduce the formula of calculation and
selection, also can contact us, our engineers will provide you with
selection guide.
Product Size Chart
| Product number | High(mm) | Width(mm) | Product weight(kg) | Installation method | Hole size(mm) | Thread size(mm) | Counterbore taper |
| JGX-127-8-X-3648-A-S | 76 | ± 2.54 | 92 | 1.81 | A, B, C, D, E, S | Ø9.0 +0.13-0.38 | M8X1.25 M7X1.0 | 90° |
| JGX-127-8-X-3047-A-S | 83 | 102 | 1.91 |
| JGX-127-8-X-2869-A-S | 89 | 105 | 2 |
| JGX-127-8-X-2313-A-S | 95 | 121 | 2.22 |
| JGX-127-8-X-1957-A-S | 108 | 133 | 2.4 |
| JGX-127-8-X-1735-A-S | 124 | 144 | 2.7 |
| JGX-127-8-X-1512-A-S | 137 | 156 | 2.9 |
| JGX-127-8-X-1201-A-S | 155 | 180 | 3.09 |
Pz direction press fit test data sheet
| Curve number | Product number | Static load(N) | Maximum deformation (mm) | Vibration stiffness Kv kN/m | Impact stiffness Ks kN/m |
| 1 | JGX-127-8-X-3648-A-S | 3648 | 32 | 954 | 471 |
| 2 | JGX-127-8-X-3047-A-S | 3047 | 38.1 | 708 | 333 |
| 3 | JGX-127-8-X-2869-A-S | 2869 | 43.2 | 613 | 278 |
| 4 | JGX-127-8-X-2313-A-S | 2313 | 48.8 | 457 | 196 |
| 5 | JGX-127-8-X-1957-A-S | 1957 | 59.9 | 340 | 137 |
| 6 | JGX-127-8-X-1735-A-S | 1735 | 74.7 | 261 | 96 |
| 7 | JGX-127-8-X-1512-A-S | 1512 | 85.9 | 207 | 74 |
| 8 | JGX-127-8-X-1201-A-S | 1201 | 102.6 | 148 | 49 |
45° Inclined Press Fitting Load Test Data Sheet
| Curve number | Product number | Static load(N) | Maximum deformation (mm) | Vibration stiffness Kv kN/m | Impact stiffness Ks kN/m |
| 1 | JGX-127-8-X-3648-A-S | 2580 | 44.7 | 539 | 236 |
| 2 | JGX-127-8-X-3047-A-S | 2157 | 52.8 | 398 | 168 |
| 3 | JGX-127-8-X-2869-A-S | 2046 | 61 | 349 | 138 |
| 4 | JGX-127-8-X-2313-A-S | 1624 | 68.6 | 259 | 98 |
| 5 | JGX-127-8-X-1957-A-S | 1401 | 84.8 | 193 | 68 |
| 6 | JGX-127-8-X-1735-A-S | 1223 | 105.7 | 147 | 49 |
| 7 | JGX-127-8-X-1512-A-S | 1068 | 121.9 | 117 | 37 |
| 8 | JGX-127-8-X-1201-A-S | 823 | 144.8 | 83 | 25 |
Shear Rolling Load Test Data Sheet
| Curve number | Product number | Static load(N) | Maximum deformation (mm) | Vibration stiffness Kv kN/m | Impact stiffness Ks kN/m |
| 1 | JGX-127-8-X-3648-A-S | 2936 | 33 | 294 | 294 |
| 2 | JGX-127-8-X-3047-A-S | 1713 | 40.1 | 207 | 207 |
| 3 | JGX-127-8-X-2869-A-S | 1557 | 45.2 | 173 | 173 |
| 4 | JGX-127-8-X-2313-A-S | 1201 | 50.8 | 121 | 121 |
| 5 | JGX-127-8-X-1957-A-S | 801 | 56.9 | 81 | 81 |
| 6 | JGX-127-8-X-1735-A-S | 601 | 77.7 | 60 | 60 |
| 7 | JGX-127-8-X-1512-A-S | 445 | 90.9 | 46 | 46 |
| 8 | JGX-127-8-X-1201-A-S | 289 | 107.7 | 30 | 30 |
Isolator Axes:
Wire rope isolators are multi-axis isolators. The diagram below
includes load axis definitions and deflection considerations.
Damping: Typically 5-15%, depending on size and input level. For
specific damping considerations, please consult Kacise.
Product Size Chart
Installation
We offer a full range of installations, including, the hole is
installed, countersunk head screw to install, thread installation,
the choices of upper and lower splints and mounting holes can be
flexible configuration. We provide two order standard inch and
metric, meet the domestic and foreign equipment, import and export
of equipment requirements. Steel wire rope laps, customers can
according to our product specification in accordance with the
number of turns of wire rope product selection and booking. The
least number of turns is 2 laps, the most commonly used is 12 laps,
can also be customized according to customer's request.
Application
