ODM Customization Anodized A380 Aluminum Diecast Security Product
Shell Housing
We mainly provide customers with hardware die-casting, die-casting
and other spare parts. At the same time, according to the product
drawings, instructions, detailed requirements or physical samples
provided by the customer, and according to the technical conditions
such as the surface treatment process, materials, processing
accuracy, etc. required by the customer, we will process and
manufacture various non-standard and special-shaped parts. Product
application industry: Our products are mainly used in various
electrical appliances, electronic products, computers,
communications, furniture, locks, toys, lighting, clocks, speakers,
instruments and equipment, mechanical equipment, optical products,
auto parts, building installation, kitchen supplies (bathroom
series), and other industries, focusing on providing high-quality
precision fasteners and other hardware parts for such high-tech
companies.
Material performance
| ZL104A | ZL10Aluminum Die Casting added Cu, reduced the content of Si. Its
casting and welding properties are worse than ZL104, but its room
temperature and high temperature strength, cutting and processing
properties are better than ZL104. Its plasticity is slightly lower
and its corrosion resistance is poor.ZL10Aluminum Die CastingA
reduces the content of impurity element Fe in ZL10Aluminum Die
Casting, improves the strength of the alloy, has better mechanical
properties than ZL10Aluminum Die Casting, and mostly uses
high-quality castings. | It is suitable for use as a dynamic structural components with
complex shape, large size and heavy load.Such as supercharger
housing, cylinder head, cylinder liner and other parts. | Sand mold casting, Metal Mold casting, die casting |
| ZL114 | ZL114 Aluminum Die Casted alloy is a complex alloying Al Cu Mg
hypereutectic wear-resistant alloy. Because of its Si content of
19-22%, and the addition of trace element Mn and rare earth element
RE, the alloy becomes a high-grade wear-resistant material with
many high hardness primary Si particles distributed on the soft
matrix, and has good casting performance, good room temperature and
high temperature strength, and low thermal expansion coefficient. | It is suitable for casting pistons, brake pads of internal
combustion engines and other structural parts with stable size and
volume and high strength that require wear resistance. | It is mainly made of metal mold or sand mold |
| ZL115 | High temperature strength, good corrosion resistance, superior
cutting performance, good welding performance, good casting
performance, no heat treatment, so that the mechanical performance
is not very good. | t is suitable for casting aeroengine, missile, internal combustion
engine, chemical pump, oil pump, petrochemical gas pump casing,
rotor, blade and other parts that can withstand medium load in
corrosive media such as seawater, chemical industry, gas, etc. | It is mainly used for die casting and sand casting |
Product show
| CHINA | USA AA/ASTM | USA SAE | UK | Japan JIS H 5302 | ISO | EN AC- |
| YL104 YZA1Si10Mg | A360 | 309 | LM 9 | ADC3 | Al-Si10Mg | 43400 |
| YL113 | 383 | 383 | LM 2 | ADC12 | Al-Si10Cu2Fe | 46100 |
| YL112 YZA1Si9Cu4 | A380 | 306 | LM 24 | ADC10 | Al-Si8Cu3Fe | 46500 |
| YL108 YZA1Si12Cu2 | 413 | - | LM 6 | ADC1 | Al-Si12 Al-Si12Fe | 47100 |
| YL102 YZA1Sil2 | A413 | 305 | LM 20 | ADC1 | Al-Si12Cu Al-Si12CuFe | 44300 |
Company Introduction
FAQ
1. How can I get some samples?
If you need, we are glad to offer you samples for free, but the new
clients are expected to pay the courier cost, and the charge will
be deducted from the payment for formal order.
2. Can you make casting according to our drawing?
Yes, we can make casting according to your drawing, 2D drawing, or
3D cad model. If the 3D cad model can be supplied, the development
of the tooling can be more efficient. But without 3D, based on 2D
drawing we can still make the samples properly approved.
3. Can you make casting based on our samples?
Yes, we can make measurement based on your samples to make drawings
for tooling making.
4. What’s your quality control device in house?
We have spectrometer in house to monitor the chemical property,
tensile test machine to control the mechanical property and UT
Sonic as NDT checking method to control the casting detect under
the surface of casting.
Q3: What is needed for quotation?
A3: If you are professional, please advise us with drawings or
samples and all detailed requirements. If you want design and put
it into market, but do not know how to start. Please contact our
sales and engineers, lets make a chat group, we will help you work
out everything.
