YZG-600 Circular Vacuum Dryer
Ⅰ,Overview of equipment
1,Vacuum drying is to heat and dry the dried material under the
vacuum condition, at the same time, the vacuum pump carries on the
air to dehumidify, causes the studio to be in the vacuum state, at
the same time the material volatilizes the moisture to be drained
by the vacuum pump, the material drying rate speeds up greatly.
Saving energy at the same time.
2,Suitable for unstable state and thermosensitive materials.
3,Because the vacuum box is isolated from the outside world, it can
be used to recover solvent and discharge toxic and irritating gas
during drying.
4,It belongs to static drying, so the form of dry material will not
be damaged.
Ⅱ,Main features
1,The wall of vacuum drying box is made of stainless steel, and the
inner wall is surrounded by arc transition.
2,The heating pipe is φ 18 * 2 stainless steel pipe,Place 4 baking
plates,the size is 310*600*45mm
3,The box body is equipped with steam sterilizing opening valve,
which can sterilize the inside of the box.；
4,The layout of heating pipe is scientific and reasonable, and the
temperature difference between top and bottom of the box is
basically eliminated.；
5,Unique door hinge design, light and flexible opening, stable
sealing；
6,Drying door handle, mirror seat and handwheel are all made of
stainless steel；
7,The box is provided with a safety valve and a mirror, which makes
the operation easier and safer.
Ⅲ, Technical parameters
1,Inside dimension: Φ600×976mm；
2,Outside dimension: 1135×810×1020 mm
3,Drying floor number: 4 layer；
4,Interlayer distance: 81mm；
5,Baking plate size: 310×600×45mm；
6,Baking plate number: 4 piece；
7,Allowable pressure in drying pipe: <0.784Mpa；
8,Inside temperature of box: ≤120℃；
9,Drying box weight: 250kg；
