Electric Racing Vehicle Micro Channel Heat Exchanger Cooling System
Cooling Ribbon
Provide micro-channel flat tubes match for battery pack space by
extrusion and drawing technology.
Design flow channels according to strength and heat transfer
requirements.
Single or multiple flat tubes are welded to the header (manifold),
and the water inlet and outlet are respectively diverted through
the header (manifold).
The inlet is processed by CNC. Suitable for bottom and side heat
exchange of prismatic batteries
We specilized in:
1) Stamped type cooling plate for prismatic cells / battery pack.
2) Snake tube for cylindrical cells, such as 21700, 18650, 3270,
4680 big cell.
3) Microchannel tube with manifold for battery pack / rectangular
cells.
4) Roll bond cooling plate
5) Machined cold plate
Our Advantages:
1. Experience integrating manifolds, tubing and interface thermal
materials
2. Experience in the design and manufacture of large size plates
3. Simulation aids flow channel design for pressure drop, flow and
heat distribution
4. High corrosion resistance and low conductivity material for
battery cooling applications
5. Flexible design solutions for all kinds of battery pack.
Test Ability:
Chemical Composition Test | YES |
Pysical Test & Optics Test | YES |
Roughness Test & Hardness Test | YES |
Elongation Test | YES |
Salt Spray Test | YES |
Burst Test | YES |
Nitrogen & Helium Test | YES |
Flow Resistance Test | YES. Inside &outside corrosion test |
Voltage Test | YES |
Under Water Test | YES. Check the leakage for welding |
Detail Products
Chemical composition
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | V | Ti |
| 1050 | ≤0.25 | ≤0.40 | ≤0.05 | ≤0.05 | ≤0.05 | --- | ≤0.05 | ≤0.05 | ≤0.03 |
| 1100 | ≤0.95(Si+Fe) | | 0.05~0.20 | ≤0.05 | -- | -- | ≤0.10 | --- | --- |
| 3102 | ≤0.40 | ≤0.70 | ≤0.1 | 0.05~0.4 | --- | --- | ≤0.3 | --- | ≤0.10 |
It can be customized according to customers' request!
Mechanical Properties
| Alloy | Temper | Tensile Strength | Yeild Strength | Elongation |
| 1050 | O/F/H111/H112 | ≥65MPa | ≥200MPa | ≥25% |
| 1100 | O/F/H111/H112 | ≥75MPa | ≥200MPa | ≥25% |
| 3102 | O/F/H111/H112 | ≥75MPa | ≥200MPa | ≥25% |
| 3003 | O/F/H111/H112 | ≥75MPa | ≥200MPa | ≥25% |
FAQ:
Q: Are you a trading company or manufacturer?
A: Yes,we are a factory with more than 10 years history in this
industry.
Q: What method of processing technology?
A: We have brazing line, stamping line, extrusion line, and roll
boned process line. Also CNC centre is available.
Q: If we don't have design, can you assist in design?
A: Yes, we can! We have a strong and experienced design team. Flow
path design, thermal simulation, mechanical simulation and design
optimation are support. Kindly share with us your detail project,
service8@trumony.com, we'd love to do DFM for you.
Q: How fast you can make prototype?
A: About 3~5wks. The precise lead time will depends on your design
and producing process
