FB 12mm 16mm 20mm Centrifugal Pump Mechanical Seal Unbalanced SGS
Approved
FB-12 16 20mm Auto Water Pump Seal Fb, Monolithic Mechanical Seal
Basic Info. of Centrifugal Pump Mechanical Seal:
Stationary Ring
Plastic Carbon/Carbon/Sic
Secondary Seal
NBR/EPDM/HNBR/
Specification
12mm to 25.4mm
Automobile water pump mechanical seal FB-12 13 15 16 17 20 25mm
Motorcycle water pump water seal Integral seal Material CAR CER NBR
Suitable for automobile water pump, motorcycle water pump,
compressor water pump manufacturer, excellent quality, excellent
workmanship, mass stock
Model | d1(mm) | d2 | d3 | d5 | d7 | l1 | l2 | l4 |
BGM FB-12S | 12 | 28.57 | 32 | 18.5 | 25 | 18.2 | 10.2 | 8 |
BGM FB-12ST | 12 | 28.57 | 32 | 18.5 | 26 | 18.2 | 10.2 | 8 |
BGM FB-12M | 12 | 30.00 | 35 | 18.5 | 25 | 18.2 | 10.2 | 8 |
BGM FB-12MT | 12 | 30.00 | 35 | 18.5 | 26 | 18.2 | 10.2 | 8 |
BGM FB-12L | 12 | 33.30 | 38 | 18.5 | 25 | 18.2 | 11.5 | 6.7 |
BGM FB-12LT | 12 | 33.30 | 38 | 18.5 | 26 | 18.2 | 11.5 | 6.7 |
BGM FB-13 | 13 | 30.00 | 35 | 18.5 | 25 | 18 | 10 | 8 |
BGM FB-15 | 15 | 36.50 | 41.5 | 22.5 | 30.5 | 20.5 | 12 | 8.5 |
BGM FB-16 | 16 | 36.50 | 41.5 | 22.5 | 30.5 | 20.5 | 12 | 8.5 |
BGM FB-16B | 16 | 36.50 | 41.5 | 22.5 | 28 | 20 | 12 | 8.5 |
BGM FB-16T | 16 | 36.50 | 41.5 | 19.3 | 31.5 | 20.5 | 11.5 | 9 |
BGM FB-16L | 16 | 38.10 | 43.5 | 22.5 | 30.5 | 20.5 | 11.7 | 8.8 |
BGMFB-16LD | 16 | 38.10 | 43.5 | 22.5 | 28.5 | 20.5 | 11.7 | 8.8 |
BGM FB-20 | 20 | 38/40 | 43.8 | 26.5 | 37 | 22 | 12.5 | 9.5 |
BGMFB-20T | 20 | 40.00 | 43.8 | 28 | 37 | 22 | 12.5 | 9.5 |
We are a manufacturer. All seals have bulk inventory and can be
shipped to you quickly. We promise to ship you in small quantities
within 3 days.Advanced technology, excellence, replace original
| 1. Different models of mechanicals seals for a wide variety of
Grundfos® pumps, among them: CR(N), NB, NK, CLM, LP, TP, etc.
Available in diverse combinations of materials and different
diameters: 12, 16, 22, 28, 33, etc. Also mechanical seals for
Sarlin®. Division of waster pumps. Available in various materials:
silicon-graphite carbide, silicon carbide-silicon carbide; combined
with EPDM and FKM elastomers. |
2. Mechanical seals are available for different references
Gorman-Rupp® pumps. Special models for the transfer of clean water,
sewage, oil industry, agriculture and others.
GRN-38'1 |
| 3. Mechanical seals for Fristam® pumps. Wide range of models and
materials in the most standard diameters: 22,30 and 35 mm.
Different assembly possibilities for the most well-known pump
models: FP, FL and FT. |
| 4. Broad range of mechanical seals compatible with Flygt® and
Grindex® waste water pumps. These mechanical seals are
characterized by their easy and fast installation, without having
to make any modification to the pump. Manufactured in stainless
steel and in solid tungsten carbide. Special tools are not
necessary for their installation. |
| 5. Mechanical seals for EMU® pumps. They get two static faces and
one rotating face. We can supply the complete seal or spare faces. |
| 6. Different designs of mechanical seals for Ebara® pumps, single
and double seals in combinations carbide-silicon carbide and
graphite-aluminium oxide. |
| 7. Mechanical seals for all types of Calpeda®pumps: centrifugal
pumps, multistage, submersible. Different models of mechanical
seals in a wide range of materials. |
| 8. Mechanical seals compatible for APV®pumps, among them: Puma,
ZMA, ZMB, ZMD, ZMS, ZMH, ZMK. Rosista®and Pasilac®, W and W+. Some
designs with wave spring like the special seals for APV Howard®
pumps and Crepaco Clean Line®. All of them have been manufactured
in materials suitable for working with fluids such as juices, milk
and drinks in general. |
| 9. Mechanical seals for ABS® submergible pumps specific wastewater
treatment. Different models of mechanical seal available: oil
chamber mechanical seal and water mechanical seal. |
Fixing and Applying Directions of Mechanical Seals
1. Select Appropriate mechanical seal to match the materials
according to work conditions and host machine equipment.
2. The radial acting deviation for the shaft(shaft sleeve) of the
installed mechanical seal shall be 0.04mm by maximum
while the axial movement value of the rotor shall be no more than
0.1mm.
3. The seal cover (or shaft cover) of the stationary ring of the
installed mechanical seals,the vertical degree of the seal
face should be 0.04mm by maximum.
4. When installing the mechanical seals,the shaft(shaft
sleeve),seal chamber,seal face as well as the mechanical seal
must be cleaned in order to keep from any medium to sealing part.
5. When conveying medium of over high or low temperature,with
medium which are easy catch fire,easy for explosion.
Related mechanical seal standards must be referred to take
appropriate measures such as quench,rinsing,coolong and
filtrating.
6. Appropricate lubrication must be choosen when mechanical seal is
installed.The installment size of the mechanical
seal must be guaranteed to the installment instruction.
FAQ
Question 1: Are you a factory or a trade company?
Answer: We are a factory and have our top sales for the trade
service.
Question 2: Can I try to get a SAMPLE before the order?
Answer: Sure. You can ask for the samples. Usually they're free.
Question 3: Where is your factory located? How can I visit there?
Answer: Our factory is located in Ningbo, China. You can fly to
Ningbo or Shanghai airport directly. All our clients, from home or
abroad, are warmly welcome to visit us!
Question 4: How does your factory do regarding quality control?
Answer: Quality is priority. We always attach great importance to
quality controlling from the very beginning to the very end. Our
factory has gained ISO9001 authentication.
Question 5: How about the lead time?
Answer: Within10-20 days after getting the prepayment.
Question 6: How can we pay?
Answer: For small sample shipping cost, you can pay either by
paypal or by T/T. And by T/T at sight for large amount of the
order.
Question 7: If OEM available?
Answer: Yes, we provide all of our products OEM /ODM service.
Question 8: If I can buy pumps or pump parts from your company?
Answer: Yes , we also provide pumps and pump parts, such as Lobe
pumps, Compound & homogeneous pumps, Homogeneous & emulsification
pumps and so on
