Hot sale china supplier 5052 5005 5754 5083 O h32 h34 h111 H116
H321 h112 aluminum sheet or plate for boat building
3000 series Aluminum alloys are Aluminum alloyed with manganese.
They have higher strength than pure aluminum while maintaining good
formability and corrosion resistance. These alloys are not heat
treatable and are suitable for anodizing and welding. Alloy 3003 is
the most widely used of all the aluminum alloys.Compare to 1100,its
strength is about 10% harder than 1100.
3003 | ALUMINUM 96.90 min | ADDITIONAL ELEMENTS
0.6 Si max,0.7 Fe max,0.05-0.2 Cu,1.0-1.5 Mn,0.1 Zn max
Mechanical properties:
Tensile strength:120-160 MPa,Density:2.72g/cm^3
Application:
These alloys perform good rust resistance,consequently,they are
often used for external packaging,machnical
parts,refrigerator,ventilation ducts of air conditioning etc,in wet
environment.Boats and ships,naval vessel,vehicle
materials,weldments for car and aircraft plate,fireproof pressure
container,refrigeration equipment,TV tower,drilling
equipment,transportation equipment,missile elements,armor,oil
tank,gasoline or lubricating oil pipe,container for food,rivet etc.
Approximate quality certification:
3003——International
standard:Al209.1(ISO),Japan:A3003(JIS),Africa:31000(IS),Russia:AMu/1400(FOC),Europe:EN
AW-3003(EN),German:AlMnCu/3.0517,France:3003(A-M1),England:3103(N3)
BS,USA:3003/A93003 AA/UNS
1.product description
Product Name | Aluminum Alloy Sheet/Plate |
Material | 1000 series,2000 series,3000 series, 5000 series,6000 series, 7000
series |
Regular aluminum alloy sheet | 1050,1060,1070,1100, 2A11,2A12,2024,
3003,3004,3005,3104,5052,5083,5182,5754, 6061,6063,6082,7075,7050 |
Thickness(mm) | 0.2-300 or customized |
Width(mm) | 100-2250 or customized |
Length(mm) | 800-11000mm or by coil |
Surface | Mill finish, wire drawing,oxidation, Mirror surface,Embossing etc
mill, bright, polished, hair line, brush,sand blast,
checkered,embossed, etching,etc |
Quality assurance | Mill Test Certificate |
Temper | O,H2,H4,H18,H111,H112,T4,T5,T6,T651,etc. |
Type | Coil/sheet/strips/plate |
2.chemical composition
| alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Zr | Ti | standard |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28/ | 5.1-6.1 | 0.05 | 0.2 | AMS |
| 7475 | 0.1 | 0.12 | 1.2-1.9 | 0.06 | 1.9-2.6 | 0.18-0.25 | 5.2-6.2 | 0.05 | 0.06 |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | 5.7-6.7 | 0.08-0.15 | 0.06 |
| 7B50 | 0.12 | 0.15 | 1.8-206 | 0.1 | 2.0-2.8 | 0.04 | 6.0-7.0 | 0.08-0.16 | 0.10-0.25 | |
| 7A55 | 0.1 | 0.1 | 1.8-2.5 | 0.05 | 1.8-2.8 | 0.04 | 7.5-8.5 | 0.08-0.20 | 0.10-0.25 | |
3.company information
we takes pride in the satisfied and loyal customer base, garnered
through a commitment to excellence. The vision and unparalleled
support from the Board of Directors along with the commitment and
expertise of the employees has helped ZhuXia attain the heights of
success in a very short period of time.
Hope our endeavours impress you as much it has our existing
customers.
