Honeywell Analog Input / Output I/O Module CC-TCF901 MISCELLANEOUS

This document provides technical information to configure the Series 8 I/O. The following Series 8 I/O items are included in this document. • TC/RTD • Analog Input – Single Ended • Analog Input with HART – Single Ended • Analog Input with HART – Differential • Analog Output • Analog Output with HART • Digital Input Sequence of Events (SOE) • Digital Input, 24 VDC • Digital Input Pulse Accumulation • Digital Output, 24 VDC • DO Relay Extension Board Definitions • Input Output Termination Assembly (IOTA): An assembly that holds the IOM and the connections for field wiring; • Input Output Module (IOM): A device that contains most of the electronics required to perform a specific I/O function. The IOM plugs onto the IOTA. Features All Series 8 components feature an innovative design that supports enhanced heat management. This unique look provides significant reduction in overall size for the equivalent function. The unique features of Series 8 I/O include: • I/O Module and field terminations are combined in the same area. The I/O Module is plugged into the IOTA to eliminate the need for a separate chassis to hold the electronics assemblies • Two level “detachable” terminals for landing the field wiring in the enclosure, providing easier plant installation and maintenance. • Field power is supplied through the IOTA, with no need for extra power supplies to power the field devices and the associated craft wired marshalling • Redundancy is accomplished directly on the IOTA without any external cabling or redundancy control devices, by simply adding a second IOM to an IOTA • For both IOM and IOTA, coated (module numbers starting with 8C) and uncoated (module numbers starting with 8U) options are provided. Conformal coating material is applied to electronic circuitry to act as protection against moisture, dust, chemicals, and temperature extremes. Coated IOM and IOTA are recommended when electronics must withstand harsh environments and added protection is necessary.

Experion Series C System Components’ List

CU-CBDS01 Series C, Single Access Cabinet
CU-CBDD01 Series C, Dual Access Cabinet
CC-MCAR01 IOTA Carrier Channel Assembly
Ca-PCNT01 C300Controi Processor
Ca-TCNT01 C300Controi Processor IOTA
Ca-PAIH01 Hi-level AI HART
CA-TAIX01 Hi-level AI HART IOTA
Ca-TAIX11 Hi-level AI HART IOTA - Redundant
Ca-PAOH01 AO 16pt HART
Ca-TAOX01 AOIOTA
Ca-TAOX11 AO IOTA - Redundant
Ca-PDIL01 Dl24V
Ca-TDIL01 Dl24VIOTA
Ca-TDIL11 DI 24V IOTA - Redundant
Ca-PDOB01 DO 24V Bussed Out
Ca-TDOB01 DO 24V Buss IOTA
Ca-TDOB11 DO 24V Buss IOTA - Redundant
Ca-TDOR01 DO Relay IOTA
Ca-TDOR11 DO Relay IOTA - Redundant
Ca-SDOR01 DO Relay Extension Board
Ca-PFB401 Fieldbus - 4 Nets
Ca-TFB402 Fieldbus IOTA - 4 Nets
Ca-TFB412 Fieldbus IOTA - Redundant - 4 Nets
Ca-PAIM01 PMIOLLMux
Ca-TAIM01 PMIO LLMux IOTA
Ca-TAMT04 LLMuxTCFTA
Ca-TAMR01 LLMux RTD FTA
Ca-PCF901 Control Firewall (8 port + 1 uplink)
Ca-TCF901 Control Firewall IOTA
Ca-FSMx01 FTE Single Model Fiber Module
Ca-FMMx01 FTE Multi-Model Fiber Module
Ca-PDIH01 Digital Input High Voltage
Ca-TDI110 DI 110 Vac IOTA
Ca-TDI120 DIII0 Vac IOTA - Redundant
Ca-TD1220 DI 220 Vac IOTA
Ca-TDI230 DI 220 Vac IOTA - Redundant
Ma-TAMT04 Low Level Multiplexer Thermocouple Field Termination Assembly
Ma-TAMR04 Low Level Multiplexer RTD Field Termination Assembly