Cat 6A Cable, CAT6A Network Cable, FTP CAT6A Cable, CAT 6A Ethernet
Cable Application
It can be applied in horizontal cabling, as the portion of a
telecommunications cabling system that extends from the work area
telecommunications outlet to the patch panels in the distribution
room, and in residential cabling that extends from the user
telecommunications outlet to the patch panels.
Product Features
TC's Cat 6A, 23 AWG, 4-pair, U/FTP shielded indoor cable adopts cross-type spline and overall aluminum foil shield, optimized to greatly enhance technical indicators, including
Attenuation, NEXT, and ANEXT, which exceed the parameters specified
in GB/T 18015.5 (IEC 61156-5) standards.
It is especially useful in some harsh electromagnetic environments where high-speed and stable cable transmission is required.
At the same time, it acts on the requirements for high transmission
in data center, and structured structured cabling in new buildings.
Application Standards
TIA/EIA568-C.2
Technical Details
| Transmission Performance | Cat.6A | TC |
| Frequency (MHz) | 4 | 31.25 | 62.5 | 100 | 300 | 500 | 600 |
| IL Attenuation (dB/100M) | 3.5 | 10.1 | 14.4 | 18.2 | 28 | 35.4 | 41.4 |
| Near End Crosstalk Attenuation (NEXT, dB) | 100.1 | 88.7 | 83 | 80.1 | 70.4 | 59.6 | 58.6 |
| NEXT Power and PS NEXT (dB) | 90.4 | 87.1 | 80.4 | 78.6 | 68.9 | 57.8 | 56.2 |
| Equal Level Far-end Crosstalk Attenuation (ACR-F, dB) | 95.8 | 91.5 | 87 | 84.1 | 76.4 | 71.6 | 72.6 |
| ACR-F Power and PS ACR-F (dB) | 91.4 | 88.1 | 85.4 | 86.3 | 76.9 | 69.1 | 67.9 |
| Return Loss (RL, dB) | 40.9 | 41.3 | 37.9 | 35 | 30.7 | 22.7 | 19.7 |
Notes: The values reflected in the table above are typically
measured, in accordance with IEC 61156-9.
| Physical Specifications |
| Conductor Size (nominal value) | 4×2×0.57 (AWG23) |
Outer Diameter of Cable (nominal
value) | 7.3mm |
Weight (305m, with package,
nominal value) | 18kg |
| Electrical Properties |
| DC resistance (20℃ ) | 93.8Ω/km |
| Earth Capacity | ≦ 5.6 nF/100m (@1kHz) |
| 100MHz Characteristic Impedance | 100Ω±15Ω |
| Mechanical Properties |
| Minimum Bend Radius (dynamic) | 29mm |
| Minimum Bend Radius (static) | |
| Maximum Installation Tension | 100N |
| Anti-Extrusion Capacity | 1000N/10cm |
| Flammability (LSZH) |
| Flame Resistance (of single wire) | GB/T 18380.12 (IEC 60332-1-2) |
| Flame Resistance (of bunched wires) | GB/T 18380.35 (IEC 60332-3-24) |
| Smoke Density | GB/T 17651 (IEC 61034-1/-2) |
| Hazardous Halogen Gas | GB/T 17650.1/.2 (IEC 60754-1/-2) |
