Double Disc Eccentric Ductile iron material 1.0Mpa Pressure Flanged Butterfly Valve

Usage:

The valve has been widely used in the fields of petrochem, ght industry, metallurgy, shipping, power, applingand draining water indrstry pharmary etc. It flowing agents include all of corrosive and uncorrosive gasliquid, seme-liquid. It can adjust and cut off the fluid. On the basis of the single eccentric butterfly valve further improved molding is the most widely used double eccentric butterfly valve. The structure of the valve stem axis deviates from the center of the disc and the center of the body. The effect of double eccentricity enables the disc to be quickly detached from the seat after the valve is opened, greatly eliminating the unnecessary excessive extrusion and scratching phenomenon between the disc and the seat, reducing the opening resistance, reducing wear, and improving the seat life

Connect size

DN	D	D1	D2	b	L	Z-Φd
400	Φ565	Φ515	Φ480	24.5	216±2	16-Φ28
450	Φ615	Φ565	Φ530	25.5	222±2	20-Φ28
500	Φ670	Φ620	Φ582	26.5	229±2	20-Φ28
600	Φ780	Φ725	Φ682	30	267±2	20-Φ31
700	Φ895	Φ840	Φ794	32.5	292±3	24-Φ31
800	Φ1015	Φ950	Φ901	35	318±3	24-Φ34
900	Φ1115	Φ1050	Φ1001	37.5	330±3	28-Φ34
1000	Φ1230	Φ1160	Φ1112	40	410±3	28-Φ37
1200	Φ1455	Φ1380	Φ1328	45	470±3	32-Φ40
1400	Φ1675	Φ1590	Φ1530	46	530±4	36-Φ43
1600	Φ1915	Φ1820	Φ1750	49	600±4	40-Φ49
1800	Φ2115	Φ2020	Φ1950	52	670±4	44-Φ49
2000	Φ2325	Φ2230	Φ2150	55	760±4	48-Φ49

Technical parameters

Main part material

Characteristics of valve

1. The valve adopts double eccentric structure, which has the sealing function that the closer the valve is closed, and the sealing performance is reliable.

2. The butterfly plate sealing ring is made of NBR T-type rubber sealing ring and is firmly installed on the butterfly plate with a pressing plate. After a period of use, the rubber sealing ring is worn out, and the pressure of the rubber sealing ring can be adjusted by tightening and loosening the screws to make the butterfly valve continue to seal without leakage and extend the service life. After the valve is installed, it can be easily adjusted or replaced in the pipeline (without removing the valve from the pipeline).

3. The butterfly plate has high strength, large flow area and small flow resistance.

4, the valve shaft is sealed with O-type rubber packing, the higher the medium pressure, the better the sealing. After the packing is worn, compensation can be obtained by continuing to press the packing gland.

Structure and principle of action

1. The valve is worm gear drive flange connection, double eccentric soft sealing butterfly valve, that is, the stem rotation center of the valve body diameter axis and valve seat sealing surface formed eccentricity. The valve is composed of valve body, disc, stem, seal plate, pressure ring, cochlear moving device and other parts.

2. Cochlear operation: rotating the cochlear hand wheel makes the valve stem rotate 90° and drives the butterfly plate to rotate 90°, so as to realize opening or closing. Because the product is double eccentric structure, can produce a CAM effect in the process of opening and closing, reduce the valve switching torque, reduce the wear between the valve seat and the butterfly plate, prolong the service life of the valve.

Routine Maintenance

9.1 Indoor: The packing room shall be oiled and opened and closed once every 1-2 months when the product is installed indoors.

9.2 Outdoor: When the product is installed outdoors, protective measures should be added to avoid corrosion of the cochlear moving head. The packing room should be oiled and opened and closed once every 1-2 months; Fill the room again after each rain and snow filling and open and close once.

9.3 Downhole: The packing room shall be filled with oil and opened and closed once every 1-2 months when the product is installed downhole; After every rain and snow, the rainwater stored in the well should be pumped out to prevent the products and the cochlear moving head from rusting after soaking the rainwater for a long time. The packing room should be filled with oil and opened and closed once.

9.4 According to different actual working conditions, different cochlear actuators can be selected. Outdoor and underground cochlear actuators can be closed, which shall be specified in the order.

Yuanda Valve Group Co., Ltd., founded in 1994, is headquartered in Yincun, Longyao, Hebei, China, the hinterland of Bohai Economic Rim surrounding Beijing and Tianjin. With a registered capital of RMB 200 million, Yuanda currently has 8 subsidiaries, of which 6 are in China and 2 overseas. Among them, the core company, which covers an area of 540,000m2 and has more than 3500 employees, is the largest high,midium and low-pressure valve manufacturing base specializing in valve development, manufacturing, and sales in China.

Yuanda has obtained DNV·GL, ISO9001: 2015、ISO14001:2015、OHSAS18001:2007, API6D（6D-0759）, CE, KS, and EAC certifications. Its""trademark is evaluated as Famous Trademark of China and Famous Brand in Hebei Province, and the product series produced under"" is a trademark registered in Korea and products produced under this trademark enjoy a good reputation in both international and domestic markets. Yuanda has been named “Credit Management AA-Rating Enterprise” by the General Administration of Quality Supervision, Inspection and Quarantine and granted the title of “China Quality Trustworthy Enterprise” by China Entry and Exit Inspection and Quarantine Association. It is also a holder of Manufacture License of Special Equipment Level A and Casting Certificates Grades B, B1, and B2, and a member of China Valve Association council, a corporate member of China Foundry Association, and a provincial enterprise technology center in Hebei. Yuanda has been granted the power to carry out import and export operations on its own and is an approved supplier of PetroChina (CNPC) and Sinopec, Guodian, Huaneng, Huadian, Datang and China Power, and China Aluminum, CCESCC, Shougang, Wuhan Iron and Steel Company, and Hebei Iron and Steel Company.

Yuanda manufactures to standards including GB/JB(china), ANSI, API, AWWA, DIN, BS, JIS, EAC, NF and so on, and uses HT200, HT250, QT400, QT450, WCA, WCB, WCC, CF3, CF8, CF3M, CF8M, 1Cr5Mo, LCB, among others, to produce a great variety of valves including gate valves, globe valves, ball valves, butterfly valves, check valves, diaphragm valves, pressure-relief valves, plug valves, and traps, which are available in 12 main categories, 200 series and 4000 specs, totaling 120,000 tons a year. These products are widely used in all civil sectors covering petroleum, petrochemical, chemical, power generation, metallurgy, water system, pharmaceuticals, urban construction, and water supply and drainage.