XHP Series Stone Crusher Machine Multi-Cylinder Hydraulic Cone
Crusher
1. Product advantages of Stone Crusher Machine XHP Multi-Cylinder
Hydraulic Cone Crusher
(1) XHP hydraulic cone crusher has large crushing ratio and high
production efficiency
Combined with higher speed and stroke, the rated power and passing
capacity of XHP crusher are greatly improved, and the crushing
ratio and production efficiency are improved.
(2) Less consumption of wearing parts and low operating cost
Reasonable structure, reliable operation, low operation cost; The
parts of the crusher are protected by wear-resistant blocks, which
can reduce the maintenance cost to a lower limit, increase the
service life by more than 30%, laminate crushing, and the finished
products have good grain shape.
Through the special crushing chamber designed by the principle of
intergranular lamentation and the matching speed, it replaces the
traditional single particle crushing principle, realizes the
selective crushing of materials, significantly increases the
proportion of fine material and the content of cube, and greatly
reduces the needle-sheet materials.
(3) Hydraulic protection and hydraulic cavity cleaning, high degree
of automation, reduce downtime
Hydraulic control discharge port and overload protection improve
the operation level of cone crusher, so that maintenance is simple,
easy to operate, short downtime; XHP series cone crusher two-way
iron release hydraulic cylinder can let the iron through the
crushing chamber, the cone crusher in the case of iron and
instantaneous congestion, hydraulic jacking, automatic discharge.
(4) Thin oil lubrication, reliable and advanced, improve the
service life
Unique thin oil lubrication system design, greatly improve the
service life of equipment. High performance non-contact labyrinth
seal without wear, improve the reliability of dust blocking,
fundamentally eliminate the original spring cone crusher oil water
mixing and other common faults.
(5) Multi-cylinder crushing cavity type, flexible application,
strong adaptability
XHP cone crusher only needs to replace the fixed cone liner plate,
moving cone liner plate, the crushing cavity type from super coarse
cavity type to short head ultrafine cavity type arbitrary
transformation, to adapt to a wide range of product particle size
requirements. Easy maintenance, easy operation and use. XHP cone
crusher parts can be disassembled and maintained from the top and
side, moving cone and fixed cone disassembly is convenient, no need
to disassemble the mounting frame, fastening bolts.
(6) Good production efficiency.
Hydraulic cone crusher provides high production capacity, product
size, and easy automatic control, with reliability.
2. Product parameters of Stone Crusher Machine XHP Multi-Cylinder
Hydraulic Cone Crusher
Model
|
Cavity
| Standard | Short head type | power(kw) | capacity | The host weight(t) | Total weight(t) |
Feeding Size(MM) | Discharging Size(MM) | Feeding Size(MM) | Discharging Size(MM) |
XHP200 | (BC) |
|
|
|
| 132-200 | 90-250 | 11.14 | 14 |
(C) | 185 | 19 | 76 | 10 |
(m) | 125 | 17 | 54 | 6 |
(F) | 95 | 13 | 23 | 6 |
(BF) |
|
| 10 | 5 |
XHP300 | (BC) | 230 | 25 |
|
| 180-250 | 110-440 | 15.8 | 19.96 |
(C) | 210 | 20 | 75 | 10 |
(m) | 150 | 15 | 50 | 8 |
(F) | 105 | 10 | 20 | 6 |
(BF) |
|
| 20 | 6 |
XHP400 | (BC) | 295 | 30 |
|
| 280-355 | 140-630 | 23 | 28.72 |
(C) | 250 | 25 | 90 | 10 |
(m) | 195 | 20 | 50 | 8 |
(F) | 110 | 14 | 40 | 6 |
(BF) |
|
| 30 | 6 |
XHP500 | (BC) | 330 | 30 |
|
| 355-450 | 175-790 | 33.3 | 38 |
(C) | 285 | 25 | 90 | 13 |
(m) | 200 | 20 | 55 | 10 |
(F) | 133 | 16 | 40 | 8 |
(BF) |
|
| 35 | 6 |
XHP800 | (BC) | 353 | 32 |
|
| 550-630 | 260-1200 |
|
|
(C) | 297 | 32 | 155 | 13 |
(m) | 267 | 25 | 92 | 10 |
(F) | 219 | 16 | 33 | 6 |
(BF) |
|
|
|
|
