HDMI 5 inch Display, Raspberry Pi 5" Touch LCD
SFHDMI500AU-800480A-CT is a new integrated (LCD screen, touch
screen, driver board) new integrated LCD display control module. It
perfectly presents the HDMI digital signal output from the PC on
the 800*480 LCD display.
1. Supports HDMI 1.3, HDMI 1.4, HDCP 1.4, HDCP 2.2 standards.
2. HDMI sources are compatible with mainstream mini PCs such as
Raspberry Pi, BB Black, and Banana Pi.
3. TOUCH is USB to I2C, no driver installation is required.
4. The design is mainly used on the Raspberry Pi Raspberry Pi
display, and can also be used for other HDMI industrial control
small screen touch devices.
5. When used as a Raspberry Pi display, it supports Raspbian,
Ubuntu, WIN10 IOT and other systems, single-touch, and when used as
a computer monitor, it supports Windows 7/8/10, five-point touch,
drive-free.
Product Features:
| Keywords: | HDMI Display 5 Inch | Resolution: | 800*480 |
|---|
| CTP Interface: | IIC To USB | Support: | HDMI, Raspberry Pi, Raspbian, Ubuntu, WIN10 IOT |
|---|
| Menu (reserved): | Brightness, Contrast, Auto-correction, Phase, Clock, Line Field
Position, Function Settings, Reset, Etc | Surface Luminance: | 300 Cd/m2 - 1000 Cd/m2 |
|---|
| Touch Screen: | CTP( Capacitive Touch Screen) | Viewing Direction: | IPS All Viewing Angles (85/85/85/85) |
|---|
| LED Lifetime: | 40,000 Hours | Operating Temp.: | –20℃ To +70℃ |
|---|
| Compliance: | REACH & RoHS Compliant | Audio Output: | 8Ω1.5W (20*30 BOX speaker * 2) |
|---|
HDMI 5 inch Display, Raspberry Pi 5" Touch LCD Product Image
HDMI Pin Definition:
| 1 | T.M.D.S DATA2+ |
| 2 | T.M.D.S DATA2 shielded屏蔽 |
| 3 | T.M.D.S DATA2- |
| 4 | T.M.D.S DATA1+ |
| 5 | T.M.D.S DATA1 shielded屏蔽 |
| 6 | T.M.D.S DATA1- |
| 7 | T.M.D.S DATA0+ |
| 8 | T.M.D.S DATA0 shielded屏蔽 |
| 9 | T.M.D.S DATA0- |
| 10 | T.M.D.S DATA CLOCK+ |
| 11 | T.M.D.S DATA CLOCK shielded屏蔽 |
| 12 | T.M.D.S DATA CLOCK- |
| 13 | CEC (Consumer Electronics Control, Optional electronic consumer controller可选择的电子消费控制器) |
| 14 | Reserved (in cable but N.C. on device) |
| 15 | SCL(DDC Clock) |
| 16 | SDA(DDC data) |
| 17 | DDC/CEC Ground |
| 18 | +5V power |
| 19 | Hot-swappable probe wires热插拔探测线 |
USB 5V Pin Definition:
USB TP Pin Definition:
Speaker Pin Definition:
Requirements for use
In order to ensure the normal use of this product and prevent
accidents such as electric shock or fire, please read and
understand all the requirements and operating procedures before
using this product. The following requirements are strictly
observed:
1. The DC power supply required by this product is generated by the
AC/DC power adapter, and the AC/DC power adapter should be kept
away from the heat source and placed in a well-ventilated place.
2. AC power socket and AC power cord should pay attention to good
grounding and can withstand sufficient current demand.
3. The input voltage of the DC power supply required by this
product is +5V, the error is not greater than +/-0.5V, and the
current is determined according to the selected LED screen and the
power of the whole machine.
4. Pay attention to good ventilation and heat dissipation, do not
place in a closed non-thermal shell or box, and do not let direct
sunlight or other heat sources bake.
5. Pay attention to avoid excessive humidity and excessive dust, so
as to avoid circuit corrosion causing failure.
6. When assembling, pay attention to reserve a certain space to
provide air convection on the board surface to dissipate heat, and
prevent electrical conductors (such as fixed iron plates such as
drive boards and high-voltage plates) and components on the board
from contacting short circuits.
7. Pay attention to prevent the drive plate from bending and
deforming due to additional pressure.
8. When assembling, pay attention to the correct electrical
connection of the drive board, LED screen, button board and other
components, select the correct LED screen working voltage (too low
will show abnormal, too high may burn out the LED screen), check
that it is correct before powering on.
9. The program on the driver board should match the corresponding
LED screen.
10. Pay attention to electrostatic protection when assembling the
board, and pay attention to avoid short circuit and static
electricity on the hand to damage the board.
11. All input and output interfaces need to be operated in the case
of power failure (plug and unplug connectors).
12. This product is suitable for general commercial use and
household, the ambient temperature: -10~+40°C, relative humidity:
≤80%.
13. Unplug the power when not in use for a long time.
