DME HASCO SUS420 Mold Date Inserts Mold Date Pins Date Marked Pins
With Screw
Stainless steel Date Marking Pin for plastic injection mold,
standard type.Save the cost of mold engraving, and the date marking
pin can be replace making the maintenance easier.
We manufature European Spanish Standard,Germany Standard,American
Standard,Janpanese Standard, OPITZ, Standard.
We can provide replaceable date stamps, innner pointer of date
stamps, three-lay combined date stamps, inserted renewable date
seal, split-type date stamp,recycling inserts,date stamp of srew
die casting die, multi date stamp,die casting die date
stamp,traditional date stamps.
We're familiar with HASCO,DME,MISUMI,PCS,PROGRESSIVE,DANLY,STRACK
standards etc standards.Our products incuding mold interlocks,,date
stamps,cooling series,wear plates,self lube bushing,guide bushes
guide pins/pillars,etc.
Product Detail of date marked pins
Material | SUS420 |
Hardness | 48-52HRC |
Heat treatment | Available |
Service | Made-to-order |
Surface treatment | / |
Closest tolerance | + - 0.01mm |
Polishness | Ra0.6 |
Axiality | 0.01mm |
Verticality | 0.01mm |
Brief Instruction of date marked pins
(1). Date mark pin can take apart,according to different time to
choose different type of inner pointer insert.
(2). Double date stamps, allows two different indications on the
plastic part without the need for two date codes, reducing cost and
space required.
(3). can save to periodically change the central insert during 7
consecutive years.
(4). It can reduce costs and space required, In the standard
version(12 months + 6 years).
(5). The lower the internal hardness, toughness especially good for
high-temperature operating environment of the mold.
(6). According to special Inject condition,use this date stamp will
avoid mold take off from positive, at the same time, no need to
take apart the mold when you change the insert part.
Install method of date marked pins
(1). Use copper or other soft material to knock when install it.
(2). Make sure the diameter and the depth of the hole is right.
(3). The center hole can not exceed the range of the lid,to avoid
sinking when ejecting.
(4). Notice the characters direction,to make sure the plastic
products beauteous.
(5). Can per the bevel to process when find R face or bevel when
install it.
Business Range
Manufacturing & inspection capacity in steel, stainless and copper
materials for precision mould parts,Cavity pins, core
pins,Punches,Ejector sleeve,CNC machining parts etc...
Services:CNC machining,CNC Milling,Sodick EDM,Sodick Wire-cut,OD
grinding,ID grinding,Surface grinding,Thread grinding,Polishing
etc..
Industries Served: Medical/Packaging/Aerospace/Electronic
Application field
Automobile parts, medical, daily necessities packaging, cosmetic
packaging, etc.
Payment Terms
T/T,Paypal,Western Union,50% deposit, balance before shipment is
available
Package
Coated with anticorrosive oil, packed in carton box
Shipment ways
DHL,TNT,Fedex are available
Advantage
(1) Highly polished finish 6-8 micro finish. |
(2) Precision form ground to close diameter tolerance +/-0.005mm |
(3) Common fractional sizes available up to 3 1/2″ long. |
(4) M-2 high speed steel 60-63 Rockwell C. |
(5) Custom sizes can be made to order up to 1″ diameter. |
(6) Custom hardness RC 64-65 and triple drawn available on request. |
How to order?
(a) Please send us drawing or sample(non-standard parts) or series
number(standard parts).
We can sign NDA if the file is belongs to intellectual property and
confidential.
(b) We evaluate the drawing and requirement immediately.
(c) We try to send the offer at the same day back to customer.
(d) If we both agreed on the offer, for trade rules, we accept 50%
Deposit before order, and 50% Balance when shipment is taking.Then
we can start manufacturing or sample process.
(e) Our production time usually takes 10 working days,sample
process takes 7 days. It depends on order quanity and product
itself.
(f) We can ship the parts by express,air,sea according to your
need.
To make the inquiry efficient and without confusion, please try to
give me the following details of your products during your inquiry:
1) The drawing of the products if it is possible.
2) The material that you need for your product.
3) The dimension and the tolerance of the product.
4) The hardness and the surface treatment.
5) Quantity of the order if it is available.
I think a lot of items will match your interest,and really hope to
establish business relationship with you!
Any questions,pls feel free to contact me at any time.
