Multiple Colour Metallic Bonding Electrostatic Chemical Powder
Coating Paint Supplier
The metallic powder passes through the bonding system and the
surface effect is more beautiful.
Hsinda artistic texture series powder coating,including elephant
texture, hammer texture, sand texture, crocodile texture, point
texture, leather texture and orange texture and so on. it can
provide epoxy,polyester,hybrid, pure polyester and other series,
suitable for a variety of complex artistic texture powder coating
indoor and outdoor, it is colorful or simple, it can cover the
substrate defects, In the case of painting equipment and process
stability , the texture of uniform and stable shape, decorative
good, beautiful lines, good
Product introduction:
Powder painting is a material coating process, where dry,
free-flowing powders are applied to a target electrostatically and
then cured with heat to allow it to flow and form a “skin”. It is
usually used to create a pre-determined hard finish, which
maintains its color hue, and is tougher than conventional paint.
After application of the powder coating, the parts enter a curing
oven where with the addition of heat, a very durable weather
resistant finish is achieved.
Powder coating is a new type of 100% solid powder coating which
does not contain solvents. With no solvent, no pollution, energy
and resources saving, recycling, environmental protection, higher
performance, low health risk to workforce, economical advantages
etc.
Product details:
| Product Details |
| Type | Epoxy Powder Coating; Polyester Powder Coating; Epoxy-Polyester Powder Coating |
| Color | RAL and PANTONE or customized |
| Surface Finish | electrostatic spray epoxy resin names paints powder coating with
free sample |
| Gloss level | electrostatic spray epoxy resin names paints powder coating with
free sample |
| Particle Size | Average 32-42μm |
| Specific Gravity | 1.2-1.7g per cubic meter |
| Coverage | 8-10 square meters per Kg at 30-90 μm film thickness |
| film thickness | Not less than 100μm |
| Application Recommendation |
| Application Voltage | 60-90 KV |
| Gun to Component Distance | 15-30CM |
| Curing Temperature | 180-200ºC,10 min-15 min |
| Powder coated Film Mechanical Properties |
| Adhesion | Cross-cut(2mm),no loss of adhesion |
| Impact Resistance | Direct impact 50kg/cm |
| Pencil Hardness | 1H-2H |
| Cupping Test | 6mm Mandrel |
| Bending Test | 5mm |
| Powder Coated Film Chemical Resistance |
| Salt Spray Test | 5% NaCl Solution for 500 hours - No change |
| Acid Resistance | 5% HCL for 48 hours dip test - No change |
| Alkali Resistance | 5% NaOH for 48 hours dip test - No change |
| Storage Stability |
| Store in ventilated, dry, clean room, temperature < 25ºC |
| Relative humidity 50-65% |
| Away from direct sunlight, fire, heat |
| For best performance, use within 6 months |
Our advantage:
♦ Our Powder finishes are available in a vast range of colors and
finishes.
♦ Including metallic effect,chrome effect,wood grain,Candy Color
Powder ,MDF powder
and other special effect,making them ideal for indoor decoration of
steel furniture,
and outdoor metal products such as agricultural machinery, auto
parts
♦ Our products have a good storage stability ,salt spray
resistance,weatherability, exterior durability,
corrosion resistance,chemicals resistance, Highly Weather- and
UV-Resistant,and also Good heat flow.
Product pictures:
Applications of Product:
| ♦ Electrical Household Appliances | ♦ Aerospace Area |
| ♦ Automotive Electronics | ♦ Fitness Equipment |
| ♦ Track Traffic | ♦ Medical Devices |
| ♦ Petroleum Pipes, Valve | ♦ Tools & Hardware |
| ♦ LED Lights, Outdoor Lamps | ♦ Radiator & Heat Sink |
| ♦ Glass Decoration | ♦ External Facilities |
more detail please contact us :+86 18190826106
or email :esu.sales7@hsindapowdercoating.com
