90 Degree Elbow ASTM A234 WP22 CL1 / CL3 Alloy Steel Buttweld Pipe Fittings

B16.9 ASTM A234 WP22 CL1 / CL3 90 degree Elbow Alloy Steel Pipe Fittings​

ASTM A234 WP22 Pipe Fittings are made up of the specification that has carbon, manganese, silicon, sulfur, phosphorous, chromium and molybdenum in its composition. This material has good dimensional stability, high toughness and hardness properties while exhibiting superior strength. Usually, fittings belonging to class 1, 2 and 3 are first liquid quenching followed by the performance of a tempering process. The elbows are used to turn the direction of the pipes. There are different classes of these pipe fittings depending on the formation and composition. The ASTM A234 WP22 class 3 Tee is better than the class 1. YUHONG can supply ASTM A234 alloy steel pipe fittings, including WP12, WP11, WP22, WP5, WP9, WP91 with different class requirement.

A234 WP22 Alloy Steel Pipe Fittings Chemical Requirements

​

Butt Weld Elbow (90°)

Pipe elbow fittings is a very important pipe fitting. When we talk about a pipe elbow, it means a length of pipe with a sharp bend in it. Pipe elbows are fitting accessories which are used widely in various industrial sectors in pipe fitting. A pipe elbow is frequently used in pressurized applications and is available in various shapes and sizes for use in different applications. A pipe elbow is a fitting installed between two lengths of pipe or tube allowing a change of direction, usually in the 90° or 45° direction.

ASTM A234 WP22 Alloy Pipe Fittings Applications

• Oil and Gas Pipeline
• Chemical Industry
• Plumbing
• Heating
• Water Supply Systems
• Power Plant
• Paper & Pulp Industry
• General Purpose Applications
• Fabrication Industry
• Food Processing Industry
• Structural Pipe