Horizontal End Suction Centrifugal Process Pump ZA80-250 for Fresh
Water, Sewage and Corrosive Liquid
The ZA/ZE series petrochemical process centrifugal pump is designed
comply with API610 standard, it could be used to transfer clean
water, hot liquid, chemical liquid, etc. The pump is constructed
with single impeller, horizontal installed, radial split volute
casing with foot support and single entry impeller, end suction,
vertical discharge. This series pump is widely used in refineries,
chemical industry, sea water desalination plants and also heating &
air conditioning, etc.
Chemical processing pumps have numerous applications within the
industry. Due to the highly corrosive, high-temperature chemicals
typically involved with these applications, pumps must be able to
transfer, unload, mix and process these harsh liquids. Sanchang
pumps carries the industrial pumps needed to best serve any
application within the chemical processing industry.
At Sanchang, our wide range of industrial pumps from top
manufacturers will perform well in many chemical industry
applications. We carry a wide range of submersible, immersible,
drum and container pumps for chemical processing and transferring.
Likewise, magnetic drive, flexible impeller, rotary lobe and
diaphragm pumps can efficiently pump liquids. Our many stainless
steel pumps also cater to the corrosive, harsh and abrasive
chemicals that must be handled. We offer industrial chemical pumps
for a wide range of uses. Browse our chemical processing pumps
below.
Main Performance Data of ZA80-250
Flow: 87- 127 m3/h
Delivery Head: 45 - 82m
Outlet Dia.: 80mm
Working Pressure: ≤ 1.2Mpa
Solid Particle: ≤ 80mg/L
Liquid Temp.: 0℃ - 150℃
Model Instruction
E.G.: ZA80-160A
ZA: Single stage processing pump (Over-Hang)
ZE: Single stage processing pump (Central-Support)
80: Outlet diameter is 80mm
160: Rate impeller diameter is 160mm
A(B,C....): Impeller code
Applications
Refineries, Petrochemical industry, Coal processing,
Chemical industry, Fibre processing industry, Paper & pulp industry
Sugar industry, Civil waterworks, Sea water desalination plants,
Heading & Air conditioning, Enviromental protection engineering.
Main Parts Configuration
The pump could be applied to transfer different kinds of liquid by
customized wet parts, here followed our recommendation of main
configuration:
| Parts Name | Clean Water | Drink Water | Hot Water | Corrosive Liquid |
| Pump Body | Cast Iron | S.S304 | Cast Steel/S.S304 | S.S304/S.S316 |
| Shaft | Carbon Steel | S.S304 | S.S420/S.S304 | S.S304/S.S316 |
| Shaft Sleeve | Carbon Steel | S.S304 | S.S420/S.S304 | S.S304/S.S316 |
| Impeller | Cast Iron | S.S304 | Cast Steel/S.S304 | S.S304/S.S316 |
| Wearing Ring | Cast Iron | S.S304 | Cast Steel/S.S304 | S.S304/S.S316 |
| Bearing | China Make/NSK/SKF |
| Seals | Mechanical Seals |
