Genuine Clutch Fork Clutch Release 22821-P20-010 Nissan Engine Parts For Nissan

Genuine Clutch Fork Clutch Release 22821-P20-010 For Honda

Tips:

The cause of the organic oil in the intake pipe of the intercooler:

The engine idles for a long time;Air filter dirty;CrankCA-SE ventilation system is clogged or deformed;

Turbocharger inlet and return lines are clogged, leaky or deformed;

The intermediate housing of the turbocharger is coking;

Cylinder wear causes the piston ring to blow up;

The flow resistance in the exhaust system is too large.

Due to the imbalance between the intake pressure and the pressure in the supercharger bearing body for a long time, the oil in the turbocharger leaks into the compressor through the seal under the action of the pressure difference.

In addition, if the amount of oil is injected too much, it will cause an inevitable increase in the lubriing oil content in the crankCA-SE ventilation system, which will cause the lubriing oil to enter the intake pipe from the crankCA-SE ventilation system.

Usually the PCV valve of the crankCA-SE forced ventilation system of the supercharged engine is installed between the air filter and the turbocharger compressor, that is to say, the gas ventilated by the crankCA-SE will also pass through the turbocharger and intercooler, the crankCA-SE ventilation contains oil, especially when the oil is filled too much, the oil content in the crankCA-SE ventilation will increase, when passing through the intercooler, due to the cooling and cross-sectional area changes, the oil in the ventilation system will inevitably condense into the intake pipe under the intercooler, but this has no impact on the system.

Shenzhen Tai Trade Ltd, Specialized in Distributing Japanese Engine Assembly and Engine Spare Parts Since 2012. We have a large range of these Engine And Spare Parts Perfect Condition and High Quality, we can provide New and Used Engines, Spare Parts for ISUZU, MITSUBISHI, NISSAN, HINO, TOTOTA, KOMATSU, , KIA, HYUNDAI and so on.

Shenzhen Tai Trade Ltd, was established in 2002 as a special Flywheel and Ring Gear manufacturer named TWOO Auto Parts Power Factory. In 2010 we renamed to Twoo Auto Parts Co., Ltd and began to export by ourselves to all over the world. In order to expand our product line and supply more and complete service to customer, we set up our own trade company--- Twoo Auto Parts Co., Ltd in 2011.

Now we supply the Starter Motor, Alternator, Compressor, Flywheel, Clutch Parts, Crankshaft, Camshaft, Turbocharger, Brake Disc and so on. Our sales network begun from Europe and North America and now has spread to South Africa, South America, Australia, Middle East and other countries and regions.