Product Description:
Application:
IDC(Internet Data Center),computing center,ISP(Internet Service
Provider ),Telecom,
Finance bank and securities,Tax,hospital system, industrial
automation, precision equipment, etc.
CNM330 series is modular online UPS for sensitive equipments. The
single cabinet power rating covers from 15KVA to 300KVA which
delivers the best of combination of reliaability, hot-swappable and
flexibility. With the latest IGBT three-level technology and DSP
control, CNM330 achieves a high input power factor, low THDi
Modular design with N+X redundancy and online hot swapping easy to
expand the capacity Full DSP control of high stability, reliability
and safety Integrated IGBT module with improved performance and
reduced size.
Working principle:
Modular UPS use double conversion on-line structure,including the
rectifier, inverter, battery charger, control circuit, the input
and output battery connector breaker. Have function that is input
power factor compensation. All modules can be online hot-swappable,
provide the highest level of availability, and maintainability.
If one power module failure will not affect the system normal
working, power module can be online hot-swappable all power module
parallel is managed by the control board, in accordance with the
unified parameters running, one power module fault can be
automatically exit parallel system, will not cause harm to the
whole parallel system.
Modular UPS system use independent static bypass module,do not use
multiple static bypass structure,avoid caused overload damage
Modules because of multiple bypass module uneven current when UPS
turn to bypass working.Themodule paralleloutput voltage accuracy
is±1%,parallel circulation current<1%.
Static bypass module contains bypass static switch only, excluded
static switch of the main circuit output; therefore, replacing
static bypass module will not cause the system power down or
transfer manual maintenance bypass,which can realize online
hot-swap replacement.
Technical Specifications:
| Model | CNM330 15-1200KVA |
| Capacity | 15-1200KVA |
| Main input | |
| Input Voltage | 380V/400V/415V |
| Input Frequency Range | 50/60Hz |
| Power Factor | Full load>0.99,Halfload >0.98 |
| THDi | THDj<3% |
| Input Power Soft-start Function | 5-30s settable |
| Input Voltage Ranges | 228V-476V;-20%～25% at Fullload;linear derating at-25%～-40%;can take
70% load at -40% |
| Frequency Range | 40-70HZ |
| Battery | |
| Battery Voltage | ±240VDC(Default),12V Battery 30~40pcs can be choose |
| Charge Voltage accuracy | ±1% |
| Bypass | |
| Bypass Input Voltage | 380/400/415VAC 3-phase 4-wire |
| Voltage Range | Default value is-20%~+15%;-40%,-30%,-10%～+10%,+15%,other ranges can
be set via software |
| Overload Capacity | Long term at 135% rated load ,150%<load<180% more than 10
min,load>1000% 100ms |
| Output | |
| Inverter Output Voltage | 380/400/415VAC 3-phase 4-wire |
| Voltage Accuracy | ±0.5%(balanced load),±1%(unbalanced load) |
| THDV | THDV<1%(linearload),THDV<3%(nonlinear load) |
| Power Factor | 0.9/1.0 |
| Three Phase Angle accuracy | 120°±0.5° |
| Current Crest Ratio | 3:01 |
| Overload Capacity | 110%1h,125%10mins,150%1mins,>150%200ms |
| Transfer Time | 0ms,15ms (Eco Mode) |
| System | |
| Frequency | 50Hz/60Hz(Settable) |
| Mains synchronization range | ±2Hz(Default value), adjustable with step of 0.5Hz within range of
+/- 0.5Hz-3Hz |
| Protection Level | IP20 |
| Communication Ports | RS232,RS485,dry contact, SNMP card, EPO,generator port |
| System efficiency | >96% at load above 50%,>95% at load above 25% |
| Operation Temperature | 0-40℃ |
| Storage Temperature | -25℃～70℃(without battery) |
| Humidity | 0-95%(no-condensing) |
| Noise(dB) | 55-62dB,Adjusted with load |
| Net Weight | 15KVA power module:20KG | 20KVA power module:20KG |
| 30KVA power module:35KG | 40KVA power module:35KG |
| Dimension(WxDxH)mm | 3 module cabinet | 600X900X1135 |
| 6 module cabinet | 600X900X1535 |
| 10 module cabinet | 600x900×2000/900X900X2000(with side cabinet) |
| power module | 440X650X132(3U)-15KVA/20KVA/30KVA/40KVA |
