KUS630 Series Ultrasonic Level Meter
1.Features
- Sophisticated filtering algorithm to exclude spurious measurements
- A variety of working conditions algorithm selection to ensure
measurement accuracy
- Piezoelectric surge safety protection
- Automatic sound velocity and temperature compensation
- Echo curve display, helpful for on-site debugging and fault
detection
- Self-inspection function, rich self-inspection information,
convenient for users to repair and debug
- The range ratio is expanded to prevent the measured value from
exceeding the range and causing misjudgment
2.Product description
Waterproof, corrosion-resistant, fully enclosed, all-weather.
3. Dimensions
Unit in the diagram is mm
4.Electrical connections and signal definitions
| Line order | Colour | Definition |
| 1 | Red | Power is positive |
| 2 | Black | power return ground |
| 3 | Yellow | Analog output, voltage output, current output switch output |
| 4 | Blue | RS485 A+ or uart TXD |
| 5 | Green | RS485 B- or uart RXD |
| Cable color | Line order | Describe | Remark |
| red | 1 | powered by | 3.3V-30V wide voltage input |
| black | 2 | GND | |
| yellow | 3 | Switch output | Switch terminal, load capacity 1A 60V, supports up to two switch
outputs with independent logic, the two terminals are the two
contacts of the switch, do not distinguish between positive and
negative poles, and can be connected at will. |
| White | 4 | Switch output |
| brown | 4 | RS485A+ | |
| green | 5 | RS485B- | |
5.Parameter description
| Model:KUS630 |
| Measuring range | 0.8m... 20m |
Blind spot | 0 ... 0.6m(Unstable working area is within 0.6m, it is not
recommended to work in this range); the minimum blind area version
of 0.3m can be achieved, which needs to be customized. |
| Supply voltage | 3.3 ... 24 V DC , ripple 10 %SS |
Working current | ≤ 45 mA (fastest measurement speed) Low-power version, sleep power consumption is less than 0.3mA,
sending power consumption is 20mA (less than 2ms), and receiving
power consumption is not more than 8mA (less than 150ms) |
Output signal | 1:Programmable analog output 0-10V. 2:RS485 output. 3:Uart serial output 4:4-20mA output 5:Switch output |
| Measurement accuracy | ≤1 % |
| Temperature compensation | yes |
working conditions
| Working temperature | -25…70℃(248...343K) |
| Storage temperature | -40…85℃(233...358K) |
other instructions
| Electrical connection | 5-core cable (analog output), 6-core cable (switch output)； |
| Protection class | IP68 |
| Shell material | PVDF |
6.Applicable occasions:
Manholes, factory water tanks, tanks, municipal engineering, tap
water, sewage treatment, water conservancy and hydropower, iron and
steel, coal mines, electricity, petrochemicals, urban rivers and
lakes, transportation and food processing industries.
7. Ordering Information
| KUS | Model | Output | Range | Describe |
| 630C | Support customization |
| Custommade |
| 0-10V | Analog 0-10V output |
| 0-5V | Analog 0-5V output |
| 0-3V | Analog 0-3V output |
| 4-20mA | Analog 4-20mA output |
| SW | Switch output |
| Uart | Uart serial output MODBUS RTU protocol |
| RS485 | RS485 output MODBUS RTU protocol |
| XXX mm | XXX mmmeans the maximum measurement distance (default1000mm) |
| KUS | 550 | RS485 | 10000mm | |
8.Parameters you need to know
1. The type of medium to be measured (liquid or solid, specific
name, clear water, sewage, mud, gasoline, diesel, toluene, sulfur
dioxide, etc.) If it is liquid, whether there is steam, mist, foam,
waves, stirring, floating objects on the liquid surface ; if solid,
whether there is dust.
2. The temperature and pressure of the medium.
3. The corrosiveness of the medium. If it is placed in a jar, it is
necessary to know whether the material of the jar has an
anti-corrosion lining.
4. The measurement range is a few meters and the blind spot is
required.
5. Working environment: such as open pools, pools with covers,
horizontal tanks, vertical tanks, spherical tanks, whether the tank
is at atmospheric pressure, etc.
6. Working voltage: 24VDC, optional 220VAC can be customized
12VDC/9VDC common power.
7. Output signal: 4～20mA current 485/0-3V, 0-5V voltage
output/relay output.
9. Equipment form: whether it needs to have a display; one-piece or
split-type.
9.More applications
