2012-200 Gpd Reverse Osmosis RO Membrane for Domestic Water Filter
Replacement
This standard specifies product specifications for reverse osmosis
membrane elements for household and similar purposes (here in after
referred to as reverse osmosis elements) .This standard applicable
to reverse osmosis membrane elements that use municipal tap water
or centralized water supply as raw water for use in homes and
similar places.
Performance
| model | Stable rejection rate(%) | average permeate flowGPD(m3/d) | test condition |
| operation pressure psi(Mpa) | test liquid NaCl(ppm) | recovery rate (%) |
| 1812-BW50 | 97 | 50(0.19) | 60(0.41) | 250 | 15 |
| 1812-BW75 | 97 | 75(0.28) | 60(0.41) | 250 | 15 |
| 1812-BW100 | 97 | 100(0.38) | 60(0.41) | 250 | 15 |
| 2012-150 | 95 | 150(0.57) | 70(0.5) | 500 | 15 |
| 2012-200 | 95 | 200(0.76) | 70(0.5) | 500 | 15 |
Membrane Dimention
| Model No. | A(Inch/mm) | B(Inch/mm) | C(Inch/mm) | D(Inch/mm) | E(Inch/mm) |
| BW-1812-50 | 11.74/298 | 1.70/44 | 0.68/17 | 0.87/22 | 10.0/254 |
| BW-2012-75 | 11.74/298 | 1.75/45.5 | 0.68/17 | 0.87/22 | 10.0/254 |
| BW-2012-100 | 11.74/298 | 1.8/46.5 | 0.68/17 | 0.87/22 | 10.0/254 |
| BW-2012-200 | 11.74/298 | 1.9/48 | 0.68/17 | 0.87/22 | 10.0/254 |
1.When PH is above 10, the Maximum Temperature of Continuous
Operation is 35ºC.
2. Under certain conditions, the presence of free chlorine and
other oxidants in the water may cause serious membrane damage,
which doesn't belong to product warranty range.
Domestic RO membrane elements are spiral wound, composite polyamide
membrane elements for Tap Water and Well Water treatment in low
salinity application. These membranes are characterized by a very
low operating feed pressure, normally is from 65psi(0.45MPa) and
result in higher salt rejection rate, above 96%. These membranes
are designed for domestic/commercial water treatment applications,
such as the treatment of low salinity waters for home, residence,
hospital, laboratory, shop, store,......
FAQ:
Q: How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30%
deposit before producing, 70% balanced against the copy of B/L.
Q: What is the delivery time?
A: Usually within 15days. Also depends on order quantities.
Q: Can the package be customized by our own logo ?
A: Yes, the package can be customized your logo, but the MOQ will be
higher for which we can discuss as per the specific orders.
Q: How to install after the products arriving destination?
A: We will provide detailed illustrations to you. And we can also
provide guide to your workers how to use it and how to maintain
it.
Q:What's the certification do you have?
A: We have NSF, ISO9001, OHSAS18001, ISO14001 Certifications.
